Joined in 2023 
82 
63 About this deal
The new circuit comes with its own fuse, so your device and vehicle are safe from any potential shorts or other problems. After crimping, apply some force to tug on the add-a-fuse from both ends and to ensure a tight connection. Take note: the only power draw that will go through this second fuse is going to be from your added connection, your dash cam or other device. p>To access finance with Payment Assist, you’ll need to have a web enabled device with you at point of purchase. Essentially, it allows you to add a new connection to an existing fuse or even create a new circuit in an empty fuse slot.
So yes, the fuse box (fuses) and fuse tap (fuses) are there to prevent a fire and damage to both the car and equipment hooked up to the car by protecting the circuits.
We strongly recommend that you either as us to install the kit for you or you use a proper qualified auto-electrician to install the hardwire kit for you, who has experience in these cameras as well as being fully insured.
Moving the handle up or down adjusts the flow rate, while moving it left or right adjusts the temperature mix. It may also protect PCBs and relays or semiconductors that are supplying the power to the fusebox from overload.This handy trim tool will allow you to guide and tuck your wiring along and under door and window trims, body. No, the purpose of the fuse is to prevent a car fire caused by overheating wiring when something goes wrong, most likely cut insulation leading to a short circuit.
You remove a fuse, bung it in the fuse tap, fit a 2nd fuse, plug the whole thing in the fuse box and you are done.Our easily accessible location and knowledgeable and friendly staff makes us the number 1 choice for your installation. I was looking at the P/Seat DRV 30 amp for constant power and the S/Heater RR 15 amp for when the car is running. This may not blow at the correct amperage or fast enough to protect what ever is attached to that circuit. TTW cannot be held responsible for any installation costs or additional costs that may be incurred after a fault or failure of camera, car electrics if installed by you.
The best way to figure out what type you have will always be pulling a fuse out of the fusebox, and identifying it by the teeth and shape. If you are not sure what type of fuse tap you need, please watch our "How to Identify Your Fuse Type" instructional video on YouTube. div class="col-sm-6 col-md-3" >
Step 1
Ask a Halfords team member about flexible finance. Keep in mind, if you were to choose a reverse way, you will be connecting the cam to two fuses (the original and the cam's fuse). We include 4 of the most common types of fuse taps in our bundle so you can be sure when it comes time for installation, you'll have the correct type of fuse taps for your particular vehicle.Want to hard-wire your BlackVue DR430/450/470/490, 500/550, 590, 600/650, 750S or 900S series dash cam directly to your car's electrical system?
Great Deal 
New Comment