Fluke Networks MT-8200-60-KIT IntelliTone 200 LAN Toner and Probe Kit

Product Information

IntelliTone Pro LAN 200 Toners take the guesswork out of hunting for an active jack, or a jack with the right service. The IntelliTone Pro LAN probe supports the time-honoured practice of making contact with the finger. Fluke Networks IntelliTone 200 Probe Includes: IntelliTone 200 Probe, RJ11 and RJ 45 patch cables, lanyard, owners CD and quick start guide, and 9 volt battery.

When plugged in to a wall jack, it provides the first indication of where to look for the cable in the closet. The IntelliTone Pro LAN 200 Toner features a service ID indicating the presence of service on the line. IntelliTone Pro 200 LAN Toner and Probe Kit includes: IntelliTone 200 LAN Toner and 200 Probe, coax F connector adapter, 2 x RJ11 and 2 x RJ45 patch cables, test leads with alligator clips, lanyards, quick start guide and 9-volt batteries.Cutting-edge tester technology provides advanced digital and analog cable location and high-resolution measurement, via the breakthrough solution that is IntelliTone™. The TIA-568A standard requires that all work areas be wired with a minimum of two jacks with the horizontal cabling being four-pair 100 ohm UTP. In this case, it may be difficult for IntelliTone to differentiate the PBX signal from the IntelliTone signal.

The smart digital signal processing in the IntelliTone™ Pro Probe clearly identifies this signal with audio and LED visual indicators, allowing you to rapidly isolate the correct cable from a bundle or on a patch panel. The analog mode can be used to isolate individual wire pairs and trace voice, audio and video cabling. This provides telecom technicians a decisive way to identify individual wire pairs before punching them down on a jack or a block, or when diagnosing voice transmission problems. More recent installations, per the TIA-568 standard, consist of an RJ-45 jack in the office with all 4 pairs punched down on the 110 blocks.IntelliTone Pro’s SmartTone analog toning can be used on voice-grade cabling (Cat 3 and below), as well as coax, security/alarm, and speaker wiring. SmartTone analogue toning eliminates frustrating guesswork locating individual wire pairs during installations. The IntelliTone Pro 200 Probe features a CABLEMAP capability that identifies common cable mis-wires in twisted pair cabling.

A 4-position jack is sure to be telecom service, whereas an 8-position jack could be telecom or data (network) connection.While often done on 66 blocks, it is possible to make the contact with the 110 connections using a metallic object.

SmartTone analog toning eliminates frustrating guesswork locating individual wire pairs during installations.

The IntelliTone™ Pro 200 LAN Toner and Probe Series from Fluke Networks gives you cutting-edge digital and analog cable locating technologies that are as advanced as the systems you work with. In the office, the wall plate jack may be 6 or 8-postion, with the 6-position jack having 4 or 6 pins. In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.