Bedec - Barn Paint - Anthracite - Satin - 5 litres

Product Information

Transform the appearance of your barn while providing long-lasting protection with Bedec Barn Paint. Specially formulated to withstand the harshest weather conditions, this revolutionary paint offers exceptional durability, making it the ideal choice for both new and old barns alike. Plastic, metal, timber and smooth surfaces should be rubbed down with abrasive paper or equivalent. Bedec Barn Paint is ideally suited to the protection of exterior buildings such as barns, stables, outbuildings, sheds, silos, windmills, and factory units (corrugated and metal box cladding). Ensure good ventilation during application and drying. Wear respiratory protection if spraying the product. Carry out any structural repairs prior to application. The substrate must be sound, dry and free from oil and grease:

Guttering, barns, outbuildings, drainpipes, windows, water silos, posts, galvanised steel, horse stables, farm equipment, tanks, doors, garden sheds, cladded industrial & factory units, corrugated metal and metal box cladding. Self-priming (unless applying to bare steel or rusty surfaces. Please prime with Bedec All Metals Primer first.) Ensure bare steel is free from rust, dust and scale, and treated with a suitable primer prior to paint application NOTE: Mahogany, Jacobean Walnut, Medium Oak and Dark Oak are semi-transparent, semi-gloss wood stains that stain the wood, rather than paint it a solid colour. Area Special precautions should be taken during surface preparation of pre-1960s paint surfaces over wood and metal as they may contain harmful leadWe will be happy to organise an exchange for the correct goods at no extra charge to yourself, please get in touch to organise this. Faulty Items It can be applied to previously painted surfaces, even those coated with weathered bitumen, tar varnish or creosote. COVERAGE Approx. 13-15 square metres per litre per coat depending upon substrate texture, porosity and application method.

Although the texture and pororsity of the surface is a variable factor, as is the method of application, Bedec estimates the spreading rate to be approximately 13-15 square metres per litre per coat. Drying Time AK0002, AK0003, AK0083, AK0095, AK1200, AK1296, AK1487, AK1873, AK1880, AK2007, AK2008, AK2009, AK2010, AK2011, AK2013, AK2014, AK2015, AKB001, AKE004, AKH003, AN0002, AN0003, AV0002, AV0003 This acrylic system is a tough durable microporous protective coating with excellent colour retention. Easy Maintenance: Bedec Barn Paint is not only durable but also easy to maintain. Its smooth, washable surface allows for effortless cleaning, making it convenient to remove dirt, stains, and debris. This saves you time and effort in maintaining the appearance of your barn, allowing you to focus on other important tasks. To get the best results, ensure surfaces to be painted are sound, clean, dry and free from all defective or poorly adhering material, dirt, grease and chalky residue. Sand all edges of remaining coating until smooth.

The advantage over conventional systems is that the coats applied are all Barn Paint, therefore no stress is built up within the coating layers.

Make sure any surface to be painted is clean, dry and free any possible contaminants such as dirt or grease. Remove any loose paint, as well as any mould and fungal growths. See the attached data sheet for specific advice on how to prepare various surfaces. Application Denatured wood - i.e wood that has been left to the elements and has been degraded as a result - should be abraded to reveal new cellsVersatile Application: Bedec Barn Paint is designed for versatile application on various surfaces, including wood, metal, concrete, and more. Whether you have a traditional wooden barn or a modern metal structure, Bedec Barn Paint adheres effortlessly, providing a seamless finish that enhances the beauty of your property. Apply by brush (we recommend the Rodo Prodec Premier Synthetic Paint Brush), roller or conventional/airless spray. It can be applied to previously painted surfaces. Approximately 12–14 m²/litre when applied by brush or roller (dependent on texture and porosity of substrate). No need to etch or pre prime galvanised steel, Prime bare steel or rusty surfaces with Bedec Metal Primer. Drying time will depend upon conditions – the manufacturer states the painted surface will be touch dry in 2 hours, recoatable after 4 hours at 18?C. Fully hardened after 1 month. Safety Information