Supacaz Unisex's Fly Ano Bottle Cage

Product Information

Considering that many new bikes are missing a pair of bottle bosses under the downtube, and there’s no such thing as a suspension fork bottle mount, the USB is a good option. It comes in four sizes: 1 1/8-inch for handlebars and seat stays, 1 3/8-inch for steel frames and forks, 1 5/8-inch for 32mm suspension forks, and 2-inch for aluminum tube bikes and 36mm suspension forks. Note that because the cage attaches via a post mount, the nut goes onto the cage and some bottle cages might not work if they don’t have a recessed channel. In the same way, all of us, as consumers, make trade-offs every single day in the products we buy and the services we use – and it seems clear that for many people, in the months and years to come, the actual financial cost will become an increasingly important part of the equation. Overall, this is a very lovely cage, and the Cerakote protection does appear to work. Obviously it's an insane amount of money, and I'm not even going to try to justify the price, other than to say you'll probably never have to buy another bottle cage again (unless you want to get a second). The only possible negative I can draw, other than the price, is that the coating does diminish the visual appeal of raw titanium somewhat. Verdict More or less, yes. All cycling bottles (or 'bidons' if you're... French) are a more or less identical diameter, and have a little notch at the same height from the base, which helps them clip into the bottle cages. Manufacturing tolerances vary though, and so some combinations of bottles and cages may be tighter or looser than others, but on the whole if they look like they're going to fit, they will. How tight should a bottle cage be?

The Barnacle by Drj0n Bagworks provides a low-profile mounting option for bottle and cargo cages on the fork, downtube, or other locations on a bike frame. The Barnacle clamp is 3D-printed from durable plastic and comes in nine diameters ranging from 25.4mm to 47mm, designed to fit commonly available downtubes in steel, aluminum, and titanium, and also rigid steel and suspension forks. You can also use rubber strips to help accommodate varied tubes. For example, 45mm with a 1mm rubber strip fits a Fox 34 or a Fox 36 without. Over the past decade, we’ve reviewed 72 bottle cages here on road.cc and this is far and away the most expensive, costing almost 30 per cent more than the next dearest one we’ve featured. Indeed, all but four cost at most half as much as this one does, and in many cases significantly less. As previous, I'm surprised at people who think they get to tell others how they can and can't spend their money. Cycle Centre Congleton Limited 2021. Cyclestore is a trading name of Cycle Centre Congleton Limited. All Rights Reserved Company No. 05107467 | VAT No: 593 733 507 Silca also says the cage should prevent scratching to your bottle, but I'm not totally sold on that – surely if you have some grit in between cage and bottles it'll mark the plastic when it goes in and out of the cage, Cerakote or not? After one particularly wet and muddy ride this winter, both my bottles were scratched from grit. So, there you go.

Topeak Feza Cage Tubular Carbon R10

Well, first of all the Sicuro cage is made from high-quality 3Al/2.5V titanium, and is hand-bent and laser welded in the USA. It's pretty light (33g on the road.cc scales, just over the claimed weight of 30g) and being titanium it's also pretty tough. On test, the Fly Anodised cage’s open design allowed for simple bottle access. The mouth of the cage is sloped inwards which increases the surface area slightly for easier bottle replacement.

Each Barnacle uses an M5 bolt and swivel nut to secure it to the tubing and a brass M5 threaded boss embedded into it. Although they can handle more, Jon suggests loading the Barnacles up with no more than 1,000 grams will have negative effects on the bike’s handling (when mounting to the fork), and should be avoided. Find more at our press release here. Functionally though they're no different to plastic or metal cages, and are a little more fragile too, so weigh up what's really important to you before pressing 'buy now'. What are the lightest bottle cages? My bottles are not held firmly and they slide in and out very easily. Great for road riding, mayve not ideal for gravel or behind the saddle installation. Not a problem but a charactetistic to be aware of.The Monkii Clip has two round cleats that fit their Monkii cage, Monkii frame bag, or Monkii wedge tool bag. It secures via a hinged clamp to any 25mm-38mm tube, such as frame tube, down tube, handlebar stem or fork leg. It has a maximum Load: 1.5 kg / 3.3 lb. Kit includes one adapter, one M5 25mm screw, one M5 50mm screw, and a rubber shim.