Blue Horizons Total Alkalinity Reducer 5 Litre

Product Information

Alternatively, if you’re just pointing your return jets upwards to create bubbles on the surface, you may need to leave them running for several days to have the same impact on pH. How to Prevent Rising Alkalinity

Chlorine levels can affect the level of pH in your pool. Cover the pool test kit, then shake it. If you are using pool test kits with test strips, wait for 30 seconds before dipping the test strips into the water collector. Then, add the reagents into the water. After adding the reagents, make sure to add a small amount of chlorine neutralizer. This is one way to get the correct reading of the total alkalinity in your pool. Both dry acid and sulfuric acid add sulfates to your water, which, at high levels, can lead to a number of issues. Then, start the aeration process. In this process, the pump will help the solution to spread out and dissolve other particles in your pool. If your total alkalinity is low, you need to raise the alkalinity. So, how to raise alkalinity in the pool?

What If the pH and Alkalinity Won’t Balance?

Total alkalinity is a buffer that keeps your pH level stable by absorbing acid content in the water. This allows you to keep your pH at the most optimal level for proper sanitation and a comfortable swim. When adding muriatic acid into your pool, make sure to turn on the water pump. The pump must be running at the maximum level.

For example, stabilized trichlor chlorine has a pH of around 3. So when you use trichlor chlorine to sanitize your water, you make it more acidic. But because it’s stabilized, it contains cyanuric acid. And that buffers the acidity in your pool water. Buffered acidity can raise the alkalinity. Keeping your swimming pool water clean and sanitary is one of the most important steps for pool maintenance. Let In The Swim’s 3 inch chlorine tablets for pools help. With a powerful active ingredient and slow dissolving formula, our chlorine tablets will keep your swimming pool water sanitary longer, saving you time and money. When your water becomes too basic, however, it leads to cloudier water, weakened sanitizer, scaling of pool surfaces, and just general discomfort on your skin and eyes.

It’s okay to use less and add more later. Remember, it’s easier to add more to correct your water balance than to adjust the pool chemistry if you add too much. 3. Add the pH Decreaser to Your Pool

When alkalinity is too high in your swimming pool, your chlorine won’t sanitize the water as effectively. And it can lead to calcium buildup, and cloudy water and irritate a swimmer’s eyes and skin. How do you lower alkalinity without lowering pH? These also rely on a color chart to determine a level, but the testing process uses a method called titration. It requires filling up a vial with water from your pool before adding drops from a reagent bottle.

What Happens if Your Pool pH is Too High?

To a lesser extent, total alkalinity also prevents sharp increases in your pH. The chemical process is a bit more complicated but it essentially involves taking up resources in the water that are required for pH to rise.