Joined in 2023 
82 
63 About this deal
Using UV to expose prints is a technical process, and any fluctuations in temperature can affect the success of the print. Within the machines base is a complex cooling system to help regulate the machine and extend its usable life. These affordable mid-sized resin printers are going to be game-changers for a lot of people. Being able to print a resin model of comparable size to an FDM printer means you can create prints with a far greater level of detail without the added irritation of cutting them up first. The Mono X, especially coupled with the Wash and Cure Plus, is the perfect choice for this mid-size market. It's striking to look at, prints exceptionally detailed models, and does so at speeds I wouldn't have thought possible.
The recommended printing parameters above is for reference only, which is more suitable for Anycubic resin. Looking inside the machine, you can see that AnyCubic has carefully looked at the robustness of the design with dual linear rails and solid lead screw to help reduce the risk of layer shift.
Video Tutorials
Within 30 calendar days of receiving the product request a return for an exchange, if the product suffers performance failure.
Tilting models, adding rafts and supports is all required to gain the best results, but there's also an element of experimentation which for those new to resin printing, means that there's a steep learning curve. The serial number of the defective product and/or visible evidence describing the defect may be required. With a print volume of 4.76 litres and a build space of 195.84 x 122.4 x 200 mm, you can afford to print larger models as well as perform multiple prints in one pass. Increased efficiency is guaranteed! Within 15 calendar days of receiving the product request a return for an exchange, if the product does not match the original description of the product in one or more significant respects. When it comes to support removal, they're best removed after washing and before curing; the resin plastic is extremely hard once cured.
KEEP IN TOUCH
Introducing the Anycubic Photon Mono X: Elevate your 3D printing experience. Enjoy ultra-sharp details with the 8.9" 4K Monochrome LCD. The Matrix UV Light Source ensures rapid and precise prints, while the UV Cooling System enhances longevity. Upgraded design guarantees user-friendly operation. Unleash creativity with Anycubic Photon Mono X.
Overall the print quality is exceptional, and comparing a print from this against an FFF 3D Printer and the print quality difference is easy to see. Layer markings are far less defined, and you can print much more complex models. The UV power of a 3D printer is the intensity of the ultraviolet (UV) light source used to cure the resin during the printing process, and it is a measure of the energy delivered per unit area of resin. UV power is measured in watts per square centimeter (W/cm²) and determines the rate at which the resin cures. Higher UV power cures the resin faster and correspondingly faster print speeds. Different UV power levels will have an impact on the quality and efficiency of the print. Adjusting the UV power according to the needs is one of the practical printing skills. It's also worth doing this if you leave the resin sat in the vat for more than 24hours. More than 48 hours in the open and I found the resin should be disposed of. Final verdictFailure to return the product to Anycubic within 7 business days after the replacement has been confirmed by Anycubic.
The Photon Mono X 6Ks is equipped with a 9.1-inch HD monochrome display with a resolution of up to 5760 x 3600 pixels. With a contrast ratio of 380:1, sharp and finer details can be displayed.Dated sales receipt issued by an authorized Anycubic distributor, showing product details and prices. While the applications auto supports are good, the settings need quite a bit of adjustment to get them right. Once powered up, the four screws around the build plate are loosened before being attached to the vertical column. Damages caused by uncontrollable external factors, including fire, flood, strong winds, or lightning strikes. During resin 3D printing process, the UV light emits ultraviolet rays, which irradiate the resin surface through the resin tank to complete the curing of the resin. The power of the UV light is an important parameter to consider, it can be adjusted when using a 3D printer. Changing the UV power will affect the quality of the print, higher UV power also means the resin will cure faster. In this tutorial, we will introduce the testing and adjustment of UV power for Anycubic Photon Mono X 6K. Understanding the UV power of 3D printers will help you get better printing results. Adjusting the UV power for different types of resins can help ensure the material cures properly and get high quality 3D prints.
Great Deal 
New Comment