276°
Posted 20 hours ago

Clearwater CH0006 Algaecide Algae Remover for Swimming Pool and Spa Hot Tub Water Treatment, Highly Effective Formula, 1 Litre

£9.9£99Clearance
ZTS2023's avatar
Shared by
ZTS2023
Joined in 2023
82
63

About this deal

Add algae concentrate or copper chelate solution to the water, depending on the needs of your pool. The amount of pH increaser or decreaser you need to add to your hot tub depends on the volume of water and how low your readings are. Refer to the dosage information will be printed on the individual chemical bottles. Remove the cover from Lay-Z-Spa to allow evaporation of the chlorine (keep the filter running constantly). Chlorine demand of water too high at start up, after holidays or due to excess contamination or neglect Every attempt should be made to avoid mixing spilled material with other chemicals or debris when cleaning up. Do not attempt to reseal any contaminated drums. Do not transport wet or damp material.

Need it in a hurry? We are also able to offer before 12 noon and Saturday delivery services. See here for information on these servicesAfter testing the PH with your dip test strips you can use the following chemicals to increase or decrease the PH.

Dip a ClearWater® Test Strip in the centre of your Lay-Z-Spa, remove and hold it still for 15 seconds. For high chlorine levels above 5ppm, we would suggest you drain the Lay-Z-Spa to the minimum mark and re-fill with fresh water to the maximum mark, this will help to dilute the excess chemical. Or, remove the cover from the hot tub to allow evaporation of the chemical (keep the spa filter running constantly).If you are going away we would suggest emptying the pool and cleaning it so the water is not left to go stagnant. Do no re-fill until you return from your trip. The ideal alkalinity range is 100 to 150 parts per million (ppm). And you can use baking soda to increase the alkalinity in your pool. Total Alkalinity (TA) is the measure of your hot tub water’s ability to neutralise acids. Balanced Total Alkalinity helps control the pH levels and the correct level to aim for is between 80 and 120 parts per million (ppm). Algaecide can kill algae, but it is best used as a preventative measure. Its main advantage is that it does not change the pH of the water, but at the same time it prevents algae from growing and developing in your pool. What’s more, the algaecide works in tandem with a chlorine sanitizer to keep pH levels balanced.

For low pH levels below 7.2 you will need to use pH Plus to help raise the pH levels and balance the water. Always pre-dissolve chemicals in a clean, plastic container in a well-ventilated area. When pre-dissolving chemicals always add chemicals to water and not vice versa. Always add the chemicals to the water.

Perfect Additions For Your Hot Tub

Such algae can appear in your pool if someone, before entering the pool, swam in a natural body of water (ocean, river, lake, etc.) and did not wash their swimsuit after that. 💛 Yellow algae Chlorine is a sanitiser that controls and prevents bacteria growth and is essential for the hot tub water to be clean and safe to use. The recommended Free Chlorine* level in a hot tub is 3-5ppm (parts per million). Drain pool to minimum mark and re-fill with fresh water to maximum mark, this will help to dilute the excess chemical.

Asda Great Deal

Free UK shipping. 15 day free returns.
Community Updates
*So you can easily identify outgoing links on our site, we've marked them with an "*" symbol. Links on our site are monetised, but this never affects which deals get posted. Find more info in our FAQs and About Us page.
New Comment