Extendable Heavy Duty Floor and Wall Roller for Laminate, LVP, Veneer, Linoleum, Carpet, Tile and Wall Coverings 7-1/2 Wide with a 17 inch Handle That Extends to 27 inches

Product Information

Chemique Adhesives now offers a heavy duty extendable 27" inch laminate roller for carpets, vinyl flooring, linoleum, wall coverings and any other roller-required projects and installations. Toppus Group Flooring Tools Supplies is there to provide flooring supplies and services to the independent trades person. Built to withstand heavy pressure from rolling veneer, thick paper or laminate goods at a multitude of angles, the Fulton J-Roller is the perfect solution for gaining maximum adhesion. Using the Fulton J-Roller gives you the ability to evenly apply pressure to your veneer, laminates and wall coverings to provide maximum adhesion.

The handle is wrapped with two separate sections of comfortable rubber grips for extended use and less hand fatigue.

The manufacturing process for the lath profile results in a textured finish, whilst all other coloured items (guides, bottom laths, lock laths, optional fascias and vision panels) are supplied in a satin finish so cannot be guaranteed to match exactly. I put a coat of contact cement on both surfaces and let it dry for 1 hour just to seal both surfaces. Economy Nylon Roller Sleeve 25 cm is a solvent-resistant roller cover designed for the application of varnishes, epoxy, and polyurethane coatings, floor paints and other materials. Some of my problem was I had heat that required a pilot light and things would cool down too much, not allowing the solvent to evaporate as quickly or evenly as it should. The roller wall is about 3/8" thick so it will stand up to the rigorous chore of applying pressure to your sheet goods.

The bottom of the handle forms the "J" to attach the heavy duty rubber roller without getting in the way of your rolling process. If you have ever applied wall paper or wall coverings, then you know that you need to work out the air bubbles and place a good amount of pressure on the covering. When building cabinets or counter tops, many times we use a laminate or wood veneer to create a truly unique look.About the only place I've ever had to use two coats is on the edges where the first coat tends to get soaked up a bit.

The HD roller has an extendable handle and a firm hand grip mounted to the roller making it more comfortable on the user when rolling large areas or in repetitive use.It is possible that some of the bottom rail will be visible below the top of the opening when the door is in the open position. Since these providers may collect personal data like your IP address we allow you to block them here. I've done many work table tops this way that are still in service today with no signs of air bubbles or laminate separation.

As well as all of this, we also aim to offer technical support provided by not only ourselves but, our current suppliers. Garage doors should be inspected upon installation and viewed in natural daylight (not direct sunlight) from a standard distance of 3 metres to view their overall appearance. T his laminate-vinyl roller features a second grip for more leverage, and includes a non-slip handle that extends from 17” to 27”. The Manufacturer reserves the right to touch up on site the paint finish and or pre-painted surfaces on its range of garage doors but no responsibility will be taken for the possibility of any paint rubs, scuffing etc on the internal wash coat finish or external painted surface. Applying pressure to laminates and adhesive edging is essential so make sure you have it down tight by using this J-roller.An inset axle and non-marking roller ensures the tools won’t scuff or mark and substrates including floors, walls, or any other finished product. wide, this compact heavy duty roller offers steady, even pressure over the entire length of the roller's action. Once you loosen the handle, simply pull it out to length up to 27" and then simply twist the handle back clockwise to lock it in. I put slats on the substrate and put the formica on the slats, position it and start pulling slats out and pushing it down.