Silverline Thread Repair Kit Helicoil Type M8 x 1.25mm (347853)

Product Information

Perfect for lightweight construction, HELICOIL® combines minimum spatial requirements with high load capacity. You can use high-strength screws optimally in low shear strength materials. Fewer connection points and reduced screw dimensions result in less material, reduced install space and lower weight. A Helicoil is essentially a free-running, stainless steel wire coil that is inserted into a hole with a thread that has been specially tapped to accept it. It is used to create a standard-sized, internal screw thread within the existing hole. Helicoils come in a range of different metric thread sizes. Helicoils, sometimes called recoils or thread repair inserts, are precision inserts that are most commonly used to repair damaged or worn threads. They can also be used to create strong new threads.

Heli-Coil 5546-8 M8 x 1.25 Metric Coarse Thread Repair Kit Heli-Coil 5546-8 M8 x 1.25 Metric Coarse Thread Repair Kit

HELICOIL® thread inserts are designed to evenly distribute loads across the screw for even distribution of stress We can adapt these clamping torques individually to meet your requirements, e.g.for securing setting screws.The M16 x 1.5 Heli-Coil ® Sav-A-Thread ® kit is a professional spark plug thread repair kit that is typically used in 4.6 and 5.4 liter 3 VALVE Ford ® Triton ® engines from 2004 to 2008, and offers the highest quality and most durable repair available to permanently restore stripped spark plug hole threads. Sav-A-Thread ® HT Thread Repair Kit HELICOIL® reduces thread fiction and its scatter range. This means that for a torque-controlled screw tightening application, the screw preload force can be adjusted more precisely, i.e. the yield point of the screw is utilized more efficiently.

THREAD REPAIR KIT M8 X 1.25 - Grainger Canada THREAD REPAIR KIT M8 X 1.25 - Grainger Canada

Metric is the most common thread type in production today. Usually specified as M then a number x another number. This signifies the thread diameter and the length of the fastener. The HELICOIL® Tangfree Free Running can be set and inserted like a screw. Free running turn by turn, the HELICOIL® Tangfree Free Running thread insert is a true-to-gauge, internal thread that can be used on both sides for secure, high-strength screw joints. Heli-Coil ® inserts are available in thread repair kits and sets for permanently repairing tapped holes which have been stripped or damaged due to wear, corrosion, and overtorque. Kits are available in inch, metric, spark plug, and pipe thread series. All kits have a quantity of inserts, the proper size drill, high-speed steel Heli-Coil ® tap, and installation tool. Just like the HELICOIL®Plus, the HELICOIL® Smart is provided with a special thread start to allow easier installation in a holding thread.Includes A Quantity of Inserts, the Proper Size Drill, Speed Steel Helix-coil Tap and An Installation Tool and a Tang Removal Tool The thread insert with tang that does not have to be broken off. Video: https://d30qymu4o00meq.cloudfront.net/boellhoff/segment/1e24071ec7324981aee30e9fda01588d/hls/1634717387671/1e24071ec7324981aee30e9fda01588d.m3u8 The dimensional stability of the ISO thread is compliant with DIN136H, 4H for special requirements, and meets the requirements of international standards.

HELICOIL® – Thread inserts for metals | Böllhoff HELICOIL® – Thread inserts for metals | Böllhoff

Thread insert for metals Video: https://d30qymu4o00meq.cloudfront.net/boellhoff/segment/49da4a465bd246308d02268fed4bc7a4/hls/1634905560207/49da4a465bd246308d02268fed4bc7a4.m3u8 Sometimes referred to by the brand names of Helicoil® or Recoil®, helically-coiled wire thread inserts are a thread strengthening fastening device used to create high strength threads in softer core materials. The high performance internal thread provided by our wire inserts is far stronger than most parent materials, and is also heat, corrosion, and wear resistant too. The dimensional stability of the ISO thread complies with DIN 13 6H, with 4H for special requirements, and meets the requirements of international standards. The coil thread insert with its precision-formed rhombic profile is free running turn by turn. This creates a true-to-gauge internal thread that can be used on both sides. The advantages of the HELICOIL® Plus systems are particularly apparent in processing and tools, as they significantly reduce installation times.

Installation process with pneumatic tool Video: https://d30qymu4o00meq.cloudfront.net/boellhoff/segment/dadc4c386cee433ebda8223edafe1bd4/hls/1634717921342/dadc4c386cee433ebda8223edafe1bd4.m3u8 These Standard Metric Kits are ideal for repairing threads of existing fasteners. All kit sizes up to 5/8in./M16 come with 30 inserts (10-1D, 10-1.5D, 10-2D). M10 x 1.5 to M24 x 3.0 no drill bits supplied. Equipped with an inserting tool, tang remover and tap, these kits are an ideal way of ensuring you have the correct tools to hand to repair fastener threads when necessary. Supplied in a plastic carry case. The thread insert without tang. You do not need a driver tang to install these thread inserts. Thus, there is no need to break off and remove tangs. Thread reinforcement and thread repair are terms that are inseparably connected with our HELICOIL® brand.