0.6mm Y Shape Tri-Point Y000 Tri-Wing Screwdriver Tool Kit Compatible with Apple Watch Repair Opening Tool

Product Information

The 12-pointed internal star shape superficially resembles the "double hex" fastener head, but differs subtly in that the points are shaped to an internal angle of 90° (derived from a square), rather than the 120° internal angle of a hexagon. In practice, drivers for the fasteners may be interchangeable, but should be examined carefully for proper fit before application of force. A hex key should not be used where a key of square cross-section is the correct fit.

Pozidriv and Phillips appear broadly interchangeable, but may cause damage if incorrectly used. Pozidriv screwdrivers will jam fit into Phillips screws, but when tightened they may slip or tear out the Phillips screw head. Conversely, while Phillips screwdrivers will loosely fit and turn Pozidriv screws, they will cam out if enough torque is applied, potentially damaging the screw head or screwdriver. [10] [23] Supadriv [ edit ]A U-drive screw has a helical thread with an angle acute enough to be driven by a hammer or pressure from an arbor press, and thus has a domed head with no means of turning it. [92] These are most frequently driven into plastics with a pre-drilled pilot hole. Sizes are: M4, M5, M6, (M7), M8, (M9), M10, (M11), M12, (M13), M14, (M15), M16, (M17) and M18 (the sizes in parentheses are less commonly used, but they do exist). Despite the similar naming scheme to metric fasteners, there is no correlation between the name of the size and the dimensions of the tool. Some sizes (at least M14, M16, M18) are also available in a tamperproof version (with a center hole) MTI Catalog" (PDF). moodytools.com. Archived (PDF) from the original on 2014-01-09 . Retrieved 2014-01-10.

Read Also: Different Types of Springs and Their Applications [Full Guide] The Function of Various Types of Screwdrivers

Add your answer

Some consumer appliances, such as espresso machines from Jura Elektroapparate, use a proprietary screw head with an eccentric oval to dissuade owners from servicing their own machines. In addition to screw drives, various nut drives have been designed to make removal difficult without specialized tools. Proprietary examples include T-Groove, Slot-Lok, Pentagon, Tork-Nut, T-Slope and Spanner designs. [69] Breakaway head [ edit ] Means for uniting a screw with a driver". US Patent and Trademark Office. US Government. Archived from the original on 5 March 2016 . Retrieved 28 February 2016.