276°
Posted 20 hours ago

All in One Shoe Colouring Kit - Restores The Colour of Leather, Suede, Nubuck, Fabric, Satin, and Canvas Footwear | Complete Shoe Dye Kit

£9.9£99Clearance
ZTS2023's avatar
Shared by
ZTS2023
Joined in 2023
82
63

About this deal

Then you may have a little trouble getting the dye to distribute evenly leaving you with both dark and light splotches that will ruin the look of the material you are trying to color. The good news is that you can give your canvas shoes a new lease on life by dyeing them. The Basics of Dyeing Canvas Shoes

The powder will stain your skin, but if it does, note that it’s non-toxic and will come off after a couple of showers. Depending on what colors you’re wanting to dye your shoes, you can mix your dye one of two ways: To create dots: hold your dye bottle above your shoe (4-6 inches) and let 1 drop fall at a time. Give the dye 10-15 seconds to penetrate the surface of your fabric and settle before moving on to the next dot. Move slowly! (Notice a trend here?! 😂) To create stripes: touch the tip of your dye bottle to the surface of your shoe, VERY gently squeeze the bottle, and slowly the drag bottle in the direction of the stripe. Just like the dots, give the dye 10-15 seconds to penetrate the surface of your fabric and settle before moving on to the next stripe. Dyeing canvas shoes is a simple and affordable way to revamp your old shoes. It allows you to add your personal touch and give your shoes a fresh, new look. Dry Method — This method entails applying dye to a dry shoe. When working with a dry shoe, you’ll have more control over your dye placement, and designs are easier to achieve. The dye will spread through the fabric a bit, but much less so than the wet method. PREPPING YOUR SHOES

If you decide to tie dye your sneakers using the wet method, your first step is to dampen your shoes by running them under water (no preferred temperature here). Some canvas shoes have a slight protective coating to prevent staining, so be sure that all of the fabric is wet to the touch.

You can also use a syringe to drop the alcohol if you do not have a medicine dropper handy. Plus, this is the best technique to use on canvas hats, and other clothing accessories you may own. Tie-Dye Canvas With Acrylic Paint Read and follow the instructions provided by the dye manufacturer carefully. This includes the recommended dyeing time, water temperature, and any additional steps or precautions. 5. Get Creative Step one has you pouring out some acrylic paints in different bowls and then adding an equal amount of rubbing alcohol to each color. Step two, mix the two ingredients with a paintbrush and strain the mixture through the strainer. There is a little more equipment involved with this option and you will need bright acrylic paint colors, several plastic bowls, rubbing alcohol, squeeze and spray bottles, paintbrushes, rubber gloves, a protective tarp, rubber bands, and old clothes. You really have no control as to how wide or where the dye will spread, but the one aspect you do have control over is the color layout. Your colors will be most saturated at the points where the dye is applied, and lighter in color where it spreads.We’ve taught quite a few sneaker tie dye private workshops, and here are the questions that usually come up: Set up your dying area. You should place your dying basin on a hard secure surface that won't move around a lot. This is to prevent the basin full of dye moving around so much that the dye spills over the edges. Additionally, you may want to put down plastic either on the surface you are working on or on the floor beneath your work area. This will protect the area in case of spills. Not if they’re rubber! Rubber, along with the metal gromets of your sneakers, will resist the dye so they should stay white. For best results, be sure to wipe off the rubber right after dyeing to avoid any possible faint staining. If you’re using Tulip® One-Step Tie-Dye®, follow these instructions here to activate your desired dye colors ⬇️ After rinsing your shoes, allow them to air dry completely. This ensures that the color sets properly and prevents any bleeding or transfer of the dye onto other surfaces. 7. Maintain Your Newly Dyed Shoes

Leave white space between dye applications, especially when using the wet method. The dye will spread over time, so give it some room! You can always apply more dye if, after 10-15 minutes, the white space is still too large for your liking. Dyeing can be a messy process, so it’s essential to protect the area where you’ll be working. Cover your workspace with plastic sheets or old newspapers to avoid staining surfaces. 4. Follow the Instructions Thoroughly clean your shoes before dyeing them to ensure optimal color absorption. Remove any dirt or stains using a gentle cleaning solution and allow the shoes to dry completely. 3. Protect Surrounding Surfaces To prolong the life of the dye, it’s recommended to avoid excessive exposure to sunlight, wash the shoes gently, and store them properly when not in use. With proper care, the dye on canvas shoes can retain its vibrancy for a long time. SummarySince canvas is usually made from natural fibers, a good reactive dye made for cotton would be the best choice. The instructions are already included so you know how to proceed. Just make sure your dyeing tools fit the size of the canvas item you are trying to alter the color. Yep, you read that title right — today we’ll be sharing all of our best tips for tie dying SNEAKERS!! Tie dyeing canvas sneakers is a total breeze…and there isn’t even any tying required!

Yes, you can dye canvas shoes that already have a pattern on them, but it’s important to consider how the pattern will interact with the dye. If the pattern is very prominent, it may still be visible after dyeing. A simple and effective way to have more control over applying dye to your wet sneaker is to use a foam paintbrush. Squeeze dye directly onto the foam brush or squeeze a little onto a tray or your plastic-covered work surface and dip your foam brush in to absorb the dye, then gently dab your damp sneakers. You’ll want to use a different brush for each color or simply rinse off the foam before using a new color. The benefit of the foam brush is that you can apply color a lot more intentionally and prevent dye from dripping down where you may not have wanted.

After all of your dye has been applied, use a wet paper towel to gently clean any dye drips off of the rubber soles. If you used the dry method be especially careful here — if any moisture from your paper towel gets on the dry fabric it could cause your dye to spread! All you need to do is brew enough coffee to make sure you get the shade of color you want. That may mean brewing large pots or two or three small pots but you will have to be the judge on how much coffee to use. Maybe! The same rule applies here as it does for the fabric of your shoes — if you’re looking to dye your laces, make sure they’re 100% cotton, like these from Dharma Trading! A note about crafting with bleach: Be sure to wear gloves and work in a well-ventilated area when handling bleach! Even better to wear a face mask, as well! It is possible to dress up canvas handbags, other bags, and shoes by using sharpies in a form of tie-dyeing. All you will need to get the job done is multi colors of sharpies, some rubbing alcohol, the canvas shoes, bag or tarp, and a medicine dropper.

Asda Great Deal

Free UK shipping. 15 day free returns.
Community Updates
*So you can easily identify outgoing links on our site, we've marked them with an "*" symbol. Links on our site are monetised, but this never affects which deals get posted. Find more info in our FAQs and About Us page.
New Comment