DrayTek Vigor167 modem 30000 Kbit/s

Product Information

Another neat touch of having the 2 ethernet ports is that the second port can be connected to the router, allowing me to access the modem interface directly. With many devices able to perform as a Modem only (so avoiding double-natting) the device becomes very difficult to connect to once it is operational - it does not have its own IP Address (apart from the one from the ISP). These steps need to be completed before 2021-05-22 or the WCF and DrayDDNS services may not work as expected. An ideal alternative to the popular Vigor 130 Modem router, the Vigor 167 offers all the same features and functionalities with 2 Gigabit LAN network ports and a built-in basic router with DCHP server.

DrayTek Vigor 167 | ProVu Communications DrayTek Vigor 167 | ProVu Communications

I am using the same DNS, same router (vigor just set up as a bridge modem, same as the old TP-Link). As well as all the benefits of the Vigor 130, the Vigor 166 also offers BT Ultrafast Fibre and an additional LAN port. Are there any advantages in upgrading the firmware if all I intend to use is its modem/bridging feature? Extensively tested to meet your expectations, the Vigor 167 provides a reliable and secure DSL connection and is compatible with all current UK UDSL2/ADSL+ networks.

what was not so good was the lack of ability to connect to the web interface to change passwords, update firmware and so on.

Draytek Vigor 166 - BT Community Solved: Draytek Vigor 166 - BT Community

I've just purchased a Vigor 167 and want to use it as a bridge, however it appears that it has the same netbios blocking of ports as the Vigor 130. If your ISP uses a different VLAN tag, please change the value of the VLAN tag in the modem's web interface accordingly. It is configurable for router/modem (bridge) modes and supports TR-069 based VigorACS3 remote management software. In most installations, your router is acting as DHCP server, giving each PC its IP address and therefore it will be in the correct subnet.Set the address to one in the same subnet as the Vigor, gateway the address of the Vigor and subnet mask as 255. Each DrayTek modem offers BT Superfast Fibre and ADSL as standard, and we also have two designs to suit your business requirement of either one or two LAN ports. My main reason is that I want to alter the default username/password , though i do wonder when it is in bridge mode whether it can be accessed. Hi folks and Mr Dreytek, I've just replaced a DM200 (which was apparently confusing poor Mr NBN due SRA ?

Vigor 167 - DrayTek

Usually at around 135-140Mbps on the HH the best the Vigor can achieve is 100Mbps at a real push and that doesn't last. DrayTek modems are designed provide your router with a reliable, consistent, and stable internet connection that aims to reach each corner of your working space. Meanwhile, routers can read the new messages to create a local network for your devices but cannot connect directly with an internet provider.The Vigor167 was successfully tested on April 8th, 2021 in the IP test center of Deutsche Telekom in Bonn on all available ADSL / ADSL2 + / VDSL / VDSL2 / 35b line types.

Quick Start Guide | DrayTek Quick Start Guide | DrayTek

Note :The stated throughput performance figures are the maximum derived from DrayTek internal testing, conducted under optimal conditions, with Hardware Acceleration enabled where available. The configuration and commissioning is, as is already well known from the Vigor160 series, very simple and intuitive and does not present the user with any unnecessary challenges so that the modem can start operating in the shortest possible time. However , since Draytek are mostly enterprise modems , then this EcoNet EN7556N chipset could be a enterprise grade chipset and may work OK. Vigor167 also supports TR-069 and can be managed by VigorACS3 for zero-touch deployment and remote management. I can connect laptop directly to Port 2 of the Dreytek and then see the management pages via it's local address (I set it to 192.Seems to be a rev-up of existing Vigor 165 - with some indication that the Vigor 165 will be replaced in the lineup. Each DrayTek modem is designed to offer stability and extensive compatibility across internet providers for a seamless online experience. Temporarily cable directly from a computer to the spare port on the Vigor167, and set the computer's NIC to have a static IP address in the 192. If you have connected your dial-up router via LAN port 1, for example, you can still access our modem via LAN port 2, for example to monitor status information. DrayTek's Vigor 167 is an ideal modem to connect your DrayTek Vigor router, or any Router and Firewall, to a DSL line.