276°
Posted 20 hours ago

Shelly 1 L switch actuator WiFi & Schneider Electric Lisse White Moulded - Single Socket Spacer, GGBLSPC1S, White

£8.435£16.87Clearance
ZTS2023's avatar
Shared by
ZTS2023
Joined in 2023
82
63

About this deal

Below the consumption chart are a variety of Shelly Device measurements. Observe the Eco (compared) value that gives a percentage of how much lower the consumption value is. In addition, also observe the total consumption value in kilo-Watt-hours (kWh), the average consumption in Watt-hours (Wh), and the maximum and minimum consumption in Watt-hours (Wh). The Shelly 1L is also a single-channel WiFi-operated relay which is more specifically intended to be used to control lights. This time I want to look at the Shelly 1PM and a newer product, the Shelly 1L. I’ll mention in passing that when the devices arrived, they included my favourite type of old-school electrical screwdriver – thanks, The company are called ALLTERCO Robotics and are based in Sofia, Bulgaria. Személyre szabott hirdetések Ezeknek a sütiknek köszönhetően mi és partnereink az Ön vásárlásai, viselkedése és preferenciái alapján releváns és személyre szabott termékeket és szolgáltatásokat tudunk Önnek felkínálni.

The 1L is a unique beast because it can run with no neutral. (I had to do a bit of research on this one) Nélkülözhetetlen sütik Ezek elengedhetetlenek a weboldal és funkcióinak működéséhez, amelyek használatáról Ön dönt. Nélkülük nem működne a weboldalunk, például nem tudna bejelentkezni saját fiókjába, vagy bevásárlói listákat létrehozni. It works as you would expect it to. After all Shelly had enough practice with other switches to nail the L&N performance. The device is very responsive and changes made via a physical switch reflect in the app within a second. No-neutral Reverse input - Invert the On/Off position, aka the device will consider the switch to be on when it is off and vice versa. In this setting, you can enable/disable Cross-Origin Resource Sharing, CoIoT and MQTT. If you enable CoIoT, a text box will appear, where you can type in the CoIoT peer. There you can enter mcast for multicast or ip:port for unicast. A device is required when the CoIoT peer is changed.

Shelly 1L

Observe the Shelly Device’s consumption chart showing power consumption in Watts (W) of the last 24 hours. Below the consumption chart, observe the current Shelly Device power consumption in kilo-Watts (kW). For Flashing any of the Shelly devices with Tasmota, I refer you to here. Typically you might FLASH Tasmota using an FTDI – but if you follow the link above it also takes you to mgos-to-tasmota – Mongoose to Tasmota conversion – now this is starting to get interesting. Of course you don’t HAVE to flash the Shelly devices to do away with the cloud – as you can use MQTT over the LAN if you wish. Connecting your Shelly to its cloud allows you to control it remotely, receive notifications and updates about your devices. The default for this setting is for the cloud to be enabled. If you disable the device cloud support, you will lose connection to your device from outside its local network! I/O URL Actions Power on the device and control your light, fan, or other appliances only by Live wire, no neutral required to be connected to the device.

Your timezone and location will be autodetected, but you can manually change them from this setting by choosing a timezone from the drop-down menu and typing in your latitude and longitude. There is also a button Auto detect location, which will make the device automatically detect the location once again if it failed the previous time. DEVICE NAME This function requires a working connection to the Internet. More than 2 actions can affect the normal operation of the device depending on the network infrastructure and the controlled devices. Networks Wi-Fi Auto on: After turning off, the relay output will be automatically turned on after a predefined period of time (in seconds).Both devices claim to comply with various EU standards (of course how that will stand up in th UK in the future is probably not set in stone forever but for now, no problem. Bypass isn’t expensive, but the extra device will increase the complexity of the installation. You can see both installation schematics below: Before you can control the device again, you’ll have to add it to your account again as a new device. DEVICE REBOOT A Shelly 1 can be used to switch on or off an appliance with a maximum load of 16A. The Shelly 1 can be used to control a light, however if you need to control a light where you have no-neutral wiring then you will need a Shelly 1L instead.

Change the current channel name. This will reflect on the device name in the application if the “Sync name” application setting is enabled. Firmware Update I mentioned, that Shelly 1L caters to both wiring standards. You can use the same device in the control boxes with no-neutral and live & neutral configurations. There is a catch. While the L&N configuration is pretty straightforward, the no-neutral installation comes with additional limits:Nem személyre szabott hirdetések Ezek a sütik lehetővé teszik számunkra, hogy általános termék- és szolgáltatásreklámokat jelenítsünk meg Önnek. While both switches will toggle the same relay, nothing stops you from detaching one of these and using Shelly app/web interface options to toggle another device via web request or MQTT call. A perfect solution if you want to use one wall switch with 2 buttons to control your main light and blinds or bedside lamp connected via a smart plug. I actually did this for my bedroom in this article. L&N The world is split by different electrical standards, as each country comes up with their own definition of what’s best for its citizens. What if there was a device that caters to both wall light switch wiring standards? Shelly 1L can connect no-neutral wall switches and the ones that come with live and neutral wire inside the in-wall console. Full disclosure, I accepted a bribe from Shelly: one coffee mug, I write about these anyway, but I would look a little more tired than usual. You can sweeten up that deal by topping up my coffee tip jar. Shelly 1L = L stands for “lite”? Restore last: (Button and Switch) - Configure Shelly device to Restore the last mode it was in, when it has power. Enable to configure the Shelly device to create a Wi-Fi AP and you can connect to its network. Can also set it to be an open network. Restrict Login

Asda Great Deal

Free UK shipping. 15 day free returns.
Community Updates
*So you can easily identify outgoing links on our site, we've marked them with an "*" symbol. Links on our site are monetised, but this never affects which deals get posted. Find more info in our FAQs and About Us page.
New Comment