Hollister Medical Adhesive, HOL7730, 3.2 Ounce

Product Information

Living with a malodorous wound can be very distressing. Studies have shown that the presence of odour and excessive exudate can lead to adverse effects on a person’s psychological state. LOCTITE ® light cure adhesives offer the performance combination of fast cure, proper adhesion, high strength and adapted flexibility for the manufacturing of tubes and connectors. Adhesives are used to assemble tubing to fittings, connectors, adaptors, IV sets, blood collection sets, drug infusion sets and feeding tubes. The three most commonly used adhesive chemistries for tube and connector assembly are: Light Cure Acrylics, Light Cure Cyanoacrylates, and Light Cure Silicones. Siltape is gemaakt van zachte siliconen die zacht zijn voor de huid, dit is vooral handig bij patiënten met een zeer dunne, broze huid die kwetsbaar is voor beschadiging.

Henkel offers high quality and durable personal protection equipment material solutions for the following areas:

Zerla PA, Canelli A, Cerne L, Caravella G, Gilardini A, De Luca G, Aricisteanu AM, Venezia R. Evaluating safety, efficacy, and cost-effectiveness of PICC securement by subcutaneously anchored stabilization device. J Vasc Access. 2017 May 15;18(3):238-242. doi: 10.5301/jva.5000655. Epub 2017 Feb 15. PMID: 28218360. Henkel has extensive experience and knowledge of centrifugal potting processes and capabilities to assist with these critical applications. Henkel’s dialyzer solution portfolio includes customized products for specific application needs such as low viscosity for optimal fiber bundle penetration, high adhesion to plastic housings, controlled exotherm for low shrinkage, as well as process optimization recommendations (centrifuge and trim times). Our medical device adhesive solutions are tested in accordance with the generally accepted global ISO test standard 10993. Reliable and high performing adhesive solutions, perfectly suitable for the use in medical products Medical devices present manufacturers with a special challenge: As well as being health-compatible, the materials used must allow high-precision production and permanent joining and must withstand various sterilization methods. This applies especially to the adhesives used for assembly.

In the specific case of MARSIs related to vascular access, the injuries may entail an increase in management cost and time. They can also lead to an increased risk of catheter infection and accidental removal. (3)(4) A highly effective medical adhesive remover that helps reduce the pain associated with the removal of medical appliances(such as ostomy bags and flanges, adhesive wound dressings and monitoring equipment). The three most commonly used adhesive chemistries for catheter assembly are: Light Cure Acrylics (UV and LED light cure) Cyanoacrylates, and Light Cure Silicones. These factors have a positive or negative influence and are sometimes difficult, if not impossible, to control or modify. They include: We know now that these injuries, irrespective of their classification, depend on various intrinsic and extrinsic factors to the patient (3)(6).Therefore, to help us to better manage vascular access, this article contains some recommendations to avoid medical adhesive related skin injuries (MARSIs). LeBlanc K, Whiteley I, McNichol L, Salvadalena G, Gray M. Peristomal Medical Adhesive-Related Skin Injury: Results of an International Consensus Meeting. J Wound Ostomy Continence Nurs. 2019 Mar/Apr;46(2):125-136. doi: 10.1097/WON.0000000000000513. PMID: 30844869; PMCID: PMC6519893. We need to consider these factors to select the right strategy (4). They undoubtedly include the choice of a stabilisation device in terms of both the type of adhesive and the structure that contains it. Our Wound Care products range is suitable for treatment of wounds in clinical settings, in hospitals or at home and can be used for long term peri-wounds such as stomas. Free samples are available to try of the following wound care products: The demand for medical protective wear has increased exponentially in recent years, as it is an important factor in protecting against infection and the spreading of diseases in healthcare environments. For this reason, factories that manufacture personal hygiene products and nonwovens are adapting their production lines to fulfill the increasing need for material for personal protective equipment. Henkel’s AQUENCE ® and TECHNOMELT ® brands provide the materials necessary to manufacture high-quality medical protective wear such as masks, gowns, and respiratory devices.

CookieYes sets this cookie to record the default button state of the corresponding category and the status of CCPA. It works only in coordination with the primary cookie.Dolcino A, Salsano A, Dato A, Disma N, Pini Prato A, Bernasconi F, Montagnini L, Avanzini S, Bevilacqua M, Montobbio G, Mattioli G, Zanaboni C. Potential role of a subcutaneously anchored securement device in preventing dislodgment of tunneled-cuffed central venous devices in pediatric patients. J Vasc Access. 2017 Nov 17;18(6):540-545. doi: 10.5301/jva.5000780. Epub 2017 Aug 2. PMID: 28777409. Whether you are producing large fluid storage reservoirs or small high-performance fluid monitoring devices, LOCTITE ® medical device adhesives provide structural bonds with superior gap filling and reliable sealing in combination with increased productivity. Common assembly applications for medical device adhesives are blood oxygenators, blood filters, heat exchangers, blood bowls, and blood pressure transducers. The two most commonly used adhesive chemistries for reservoir & enclosure assembly are: Light Cure Acrylics and Cyanoacrylates. As your medical device adhesive consultant, we provide engineering and training services to help you find the right solutions for your requirements. Our skilled engineers and adhesive specialists have years of combined experience developing cost-efficient solutions for the medical market that improve product reliability and safety. Homecare from NWOS is an independent Dispensing Appliance Contractor (DAC), offering a wide range of products from all manufacturers. They are completely independent, and for this reason, hold no vested interests in promoting or marketing any one brand of products directly to patients. Kleine incisies, zoals biopten, kunnen worden afgedekt met Siltape zonder de wond of de omliggende huid te beschadigen.

Infuuslijnen en infuusnaalden kunnen worden vastgezet met Siltape, omdat het kan wordenherbruikt zonder verlies van hechting. Door de atraumatische zachte siliconen zal er geen weefselbeschadiging optreden. Permabond 4C20 is a rapid-curing, cyanoacrylate medical adhesive ideal for the bonding of disposable medical devices. It is an industrial-grade adhesive, possessing both USP Class VI and ISO 10993 cytotoxicity approvals. This adhesive has been notably used to bond scalpels in high-speed production. Overall, it is a diverse adhesive that is utilised in various medical applications. Permabond 4UV80Surgical & diagnostic medical devices include clamps, retractors, drills, scopes, and suction tips and tubes. In these applications, strict standards have to be met for adhesives to be qualified for use. One main safety consideration is the adhesive’s reaction with water, chemicals and oxygen; with incompatibility of the adhesive and application posing a threat to life. Finding the right adhesive solution for medical applications ensures that these threats are eliminated and user safety is paramount. Top Medical Grade Adhesives Permabond A1042 Medical device manufacturers around the world depend on our diverse portfolio of high-quality adhesives and all of our acrylic and cyanoacrylate adhesives meet ISO 10993 standards. The medical, medical electronic and drug delivery engineers, specialists and chemists at Henkel realise that your product design solution is unique, so your Henkel material solution must be as well. CliniMed distributes a wide range of skin barrier creams and films, dressing removalsprays, sterile medical adhesive removers and activated charcoal wound dressings.