Joint It Simple Jointing Mortar Dark Grey (1 x 20kg) - Large Size

Product Information

As well as larger tools such as plate compactors for compacting loose soil, gravel and sand, block cutters and paver sets. The paving should not be walked on for approximately 24 hours after application in temperatures of around 20° Celsius. When applying Joint-It Simple, take care to use plenty of water and remove all excess product from the top of the slabs at the end of the application. Ensure the joints, all of the joints are cleaned out to a minimum depth of 20mm and a width of at least 3mm up to 25mm is recommended. This easy jointing compound provides the ideal solution for professional contractors and homeowners.

We recommend that all joints are cleaned out to a minimum depth of 20mm and a width of at least 3mm but wider and deeper joints are totally acceptable. However, it may be useful for others to know that there must be no soil underneath where you're filling as the weeds quickly grow again and push through the filler. We recommend that you gently test the joints to make sure they have set before walking on the paving. Our range of sponge machines protects the joints between paving slabs by avoiding washing away the cement, whilst the machine removes the need for individuals to wash away grout on their hands and knees. Brush away and clean the slabs thoroughly and carefully using a with a fine brush (24″ version is good for this), ensuring all of the excess Joint It is removed.When all of the joints are full of product, and the paving looks like this, then soak the paving again with water.

Dark Grey: A balanced darker option , the most popular choice and suitable for many paving choices .A hard bristle brush is used on the wet paving, to brush the product into the joints, and a soft bristle brush is used to finish the job. In cooler climates it should take longer for the product to harden while in warmer climates it should harden more quickly. While it is important to soak the paving before applying Joint-It Simple, it is equally important to keep it wet, particularly where you are working on a large area (one area might dry out by the time you are brushing the product in), or in warmer weather conditions. If the temperature is forecast to drop near freezing or below freezing within 12 hours of application, Joint-It Simple should not be used, because the water will freeze as it hits the ground making it too difficult to sweep the product into the joints. Designed for use in all weathers, replaces traditional mortars and grouts with a more modern and efficient product.

We have samples available across all of our ranges and easy to use laying guides to help you install our products. You can change your choices at any time by visiting Cookie preferences, as described in the Cookie notice. A quick application of Joint-It So Clean will keep your patio looking refreshed, clean and tidy – removing any lichen, moss and algae that may have settled in shaded areas. We strongly recommend that you watch our application video before you start the foundations for your paving.

If you have any product leftover after use, just put it back in the bucket and cover with clean water. It is now best to apply some more water via the hose gun, gently and no need to apply too much, just enough to wet the ground, this helps with the jointing mortar flow into the joints. If you notice small dots on your paving slabs, this indicates that part of the slab was of a harder density, and the residue should weather-off over a 3-6 month period.