Joined in 2023 
82 
63 About this deal
By simultaneously depressing the two buttons on either side of the handle, we were able to eject the storage tray that comes with six bits—two slotted and four Phillips head. The shaft comes with a magnetic head that holds the bits securely. If you’ve ever tried to tighten or loosen screws in tight spots where a straight-handled screwdriver won’t fit, consider the MulWark Low Profile Mini Ratchet Screwdriver. It comes with 20 bits, featuring an assortment of Phillips-head bits, slotted bits, torx bits, and hex bits. It comes with a strong magnet in the head so bits don’t fall out. No onboard storage because this tool is just too small, but the bits fit in two plastic holders that can be easily stored together in a drawer. Ratcheting screwdrivers aren’t new technology. One of the first popular models was the “Yankee,” manufactured by North Bros and first marketed in 1895. Not much has changed in the ratcheting function since then.
Most ratcheting screwdrivers use a gear-and-pawl system. Depending on the direction you set the screwdriver to, the pawl will engage with the gear, forcing the tip to rotate with the handle. When you twist the screwdriver in the other direction, the pawl skips over the gear’s teeth, rotating the grip independently of the tip. The benefit of these screwdrivers is that, many times, the bits are long. You can get a good grip on them when storing or swapping bits. The downside is that these screwdrivers are often heavier, and bits often fall or slide out of lower-end models when you aren’t looking. KitsIf you’re looking for a heavy-duty ratcheting screwdriver capable of frequent use, consider the Wera Kraftform Kompakt RA Screwdriver. This ratcheting screwdriver has secure in-handle storage for your bits. It also has an ergonomically designed grip for comfortable use and plenty of torque.
The MulWark is made to insert and remove fasteners where there’s very little room to maneuver. Although it was the smallest ratcheting screwdriver we tested, we were able to insert screws in different types of wood—even in walnut—without the ratcheting mechanism failing. But because the MulWark is intended for use with fingers, not a fist grip, our fingers wore out before the tool did. For those times when you need to insert fasteners behind a mounted flat screen or in another tight spot, the MulWark shines. The benefit of storing the bits in the handle is that it’s harder to lose them. As long as the cap stays shut, the bits are secure, even if they pop out of their clips. The downside is that switching between bits stored in the handle does create some downtime. Also, these bits are often smaller and harder to grip. Bits on the Handle
Screwdrivers are essential pieces of kit, used by DIYers and professionals alike. Ratcheting systems give you a mechanical advantage and make the job much easier to complete. The directional collar on the Bahco switches directions smoothly, and the screwdriver’s ratcheting action is smooth. We inserted screws into pine, ash, and walnut boards, and the Bahco didn’t miss a beat, even when we exerted force. There’s a tiny bit of play in the shaft, which we would have preferred not to be there, but it wasn’t enough to affect the tool’s performance. We tested the Milwaukee’s ratcheting action on a variety of boards, and it didn’t bog down even when we used maximum force inserting screws into walnut wood.
There are a handful of styles of ratcheting screwdrivers, so the results of our tests and this comprehensive guide let you know what’s out there before you start shopping. The main difference in style is how each screwdriver stores its interchangeable bits. There are benefits to each style, so it’s worth giving some consideration. Bits in the Handle There are some things worth considering when shopping for the best ratcheting screwdriver beyond just the style of bit storage. Consider the length, the grip, and other built-in features you might find with certain models. Keep the following points in mind while shopping so you’re sure to get the best ratcheting screwdriver for your needs. Types of Ratcheting Screwdrivers Each of the ratcheting screwdrivers we tested was pushed to its limits so we could get a good idea of how it would perform over time and in various situations. With each tool, we inserted screws into three types of wood—pine, ash, and walnut—to see whether the ratcheting action would stand up to the different densities. The Wera ratcheting screwdriver feels solid in the hand, and one of the first things we noticed was its nonslip, ergonomic grip that’s contoured to help the user get a firm grasp. The bit storage base slid out easily with just a light push of the button on the bottom, making it easy to select the bits. We inserted screws in pine, ash, and walnut boards, and the screwdriver held up to all densities.
We used the Megapro to insert screws in pine, ash, and walnut boards, and then we tested it on removing stubborn screws. It stood up to strong twisting force, and the ratcheting action didn’t slip or break. We used quite a bit of torque. If we could ask for one thing to be different it would be a magnet in the head—when we turned the screwdriver downward, the bits often fell out.
Great Deal 
New Comment 