MSI MAG X570 TOMAHAWK WIFI Motherboard ATX - Supports AMD Ryzen 5000 Series Processors, AM4 - Mystic Light, DDR4 Boost (5100MHz/OC), 2 x PCIe 4.0 x16, 2 x M.2 Gen4 x4, HDMI, 2.5G LAN, Wi-Fi 6E

Product Information

I don’t think many people will have too much to complain about with the Tomahawk in terms of looks it’s quite an attractive board that will look good in any build, if it wasn’t for the placement of the LEDs the board does have instead integrating them as part of the rear IO shroud it would have scored higher that is one area that isn’t easily customised with lighting so the board would have been well served by having some there, we just don’t need LEDs near the DIMM slots anymore MSI because we have these doodads you might have heard of that have been around a while now called LED RAM coolers and these fancy things called LED memory modules.

If wifi\LAN is an important factor for someone you sure as hell won't be using the on-board AX200 or Realtek 8125B you're going to be using something much higer end like a 10GbE PCIe LAN card, for all other uses 1GbE ethernet is still ample. Gen AMD Ryzen™ Processors support DDR4 1866/ 2133/ 2400/ 2667/ 2800/ 2933/ 3000/ 3066/ 3200 Mhz by JEDEC, and 2667/ 2800/ 2933/Ryzen™ with Radeon™ Vega Graphics and 2nd Gen AMD Ryzen™ with Radeon™ Graphics support PCIe 3.0 x8 mode As it left less than a pleasant impression during the RMAA tests the ALC1200 has the chance to draw first blood in the subjective audio test, with no equaliser sounds are muddy, muffled, and flat sounding like everything was being spewed out across the same channel, the audio just has no life or soul, or depth, definition, and clarity if you prefer. Equipped with high-quality audio components and advanced audio processing technologies, this motherboard delivers an immersive sound experience, enhancing your gaming, movie-watching, and music-listening pleasure.

The Mag X570 Tomahawk motherboard offers a robust power delivery system, ensuring stable and efficient power distribution to your CPU. It supports up to 128GB of DDR4 memory, allowing for seamless multitasking and smooth operation of resource-intensive applications. I am absolutely elated by the fact the Tomahawk is not loaded with LEDs but the placement of the few LEDs the board does have I don’t like, MSI for reasons that I’m quite sure absolutely nobody can fathom still insist on placing the LEDs on the rear of the board at the edge near the DIMM banks, this position someone clearly has a real turn on for heh... lights, turn on and off, yes, another intended pun. The most logical place to put LEDs if you are going to use them is somewhere you can’t easily illuminate yourself if you want to, like as part of the shroud over the rear IO like on the X470 GPC (you’re going to see this board referenced a lot). Finally coming to the M.2 slots I am pleased to see both of them have a heatsink, you either include heatsinks for every M.2 slot you have on the board or don’t include any there is no halfway house here because people like to match things like that up. Supports PCIe 3.0 x4 (2nd Gen AMD Ryzen™/ Ryzen™ with Radeon™ Vega Graphics and 2nd Gen AMD Ryzen™ with Radeon™ Graphics) Moving on to talk about the VRM configuration, the X570 Tomahawk uses the ISL69247 controller of which six signals are taken for the vcore portion of the VRM and then doubled using ISL6617 phase doublers. Those 12 phases then connect to the stars of the show, a dozen ISL99360 60A power stages. In the previous Gaming Edge WiFi, MSI used an Infineon IR35201 controller with four signals for the vcore VRM, each doubled using an IR3598 phase doubler.

Knowledge Base

And as in new build goes, well, I do believe the MAG X570S Tomahawk MAX WiFi, despite being the best of the three, does not bring enough on the table to motivate the extra expenditure when compared to its X570 but most noticeably its B550 siblings. And that all translate in a cool and efficient VRM, even in the most demanding and continuous load. MSI MAG X570S TOMAHAWK MAX WiFi We are dealing with 14 60 amps Powers stages, 12 of which are CPU centric.We have 12 direct phases, delivering a whooping 720 AMPs to our CPU.

Cutting out the chuff we are going to get straight to where people will spend most of their time, the OC menu. With UEFI 1.5 you’ll finally have a complete set of options I won’t praise or judge for it taking until this point to happen as it is hard to know if the fault lays with MSI or AMD in this instance due to the AGESA code but it certainly would have been nice to have more refined firmware for the board earlier than this point. I do like how you literally have every tool for OCing at your disposal including the more obscure ones like CPU switching frequency and Spread Spectrum although the latter you can only enable or disable which is a bit annoying and certainly limits the usefulness of Spread Spectrum when trying to get rid of some EMI but chances are it won’t do much for EMI anyway. I think you can all probably guess what I’m going to bring up next... the horribly, and needlessly, bloated UI. Just look at all of that wasted space this UI could be much more compact and every bit as easy to use what is it with all these unnecessarily bloated UI’s over the last couple years? Realtek Ethernet (if theres one thing about Realtek thats stand out good its that driver support for their hardware lasts practically forever) and you don't mention using a WiFi 6 router - of course it won't be much better than a cheap USB WiFi dongle if you're using a WiFi 5 router) In short, upgrade wise, if you run a X570 TOMAHAWK, or a B550 Tomahawk, don’t waist your time and money for an upgrade.

Khuyến mãi

Now for testing, my RMAA results will differ from most as I test with the system loaded not idle because this is when EMI and crosstalk potential is going to be at the highest levels, and guess what sorts of scenarios this happens in, Yup, gaming, so testing this way will give you a more accurate representation of how the audio will perform in actual usage and why I test the audio with a gaming benchmark in addition to RMAA. Only support when using Ryzen™ with Radeon™ Vega Graphics and 2nd Gen AMD Ryzen™ with Radeon™ Graphics Processors If you want to run your own RMAA tests using the same criteria I do you can do so by following these steps; To record the temperatures we're using a digital thermometer with K-Type thermocouples and we're reporting peak MOSFET surface and rear PCB temperature. For the MOSFETS this means we're measuring the temperature directly on top of the component, between it and the thermal pad and not the internal temperature which is bound to be a little higher. Still with all boards tested under the exact same conditions that will give us a clear picture of how the VRM temperatures compare.

I never thought there would be a day when I would have to rate the accessories bundle below the automatic 5, but here we are, exclude what isn’t absolutely necessary, the WIFI antenna, driver DVD and manual and what are you left with? Two SATA cables, bloody two! Hands up who has more than two devices in their system that require the use of a SATA cable, I bet that’s 80% or more of you and exactly why MSI earns the dishonour of being the first to score below the automatically awarded 5 points for an “average” accessories bundle. You need to at least include enough SATA cables MSI to amount to half of the SATA ports on the board, that’s the rule for the accessories to be considered “average”. It is the lowest of bars, and you failed. In the middle of the board, we spy two M.2 slots (under the heatsinks) and four PCIe slots. Starting with the latter, there are two full-size slots, with the primary (top) slot reinforced to prevent shearing from heavy graphics cards. These two slots both support PCIe 4.0 speeds, with the top running a full x16 and the bottom running up to x4 speeds. This configuration supports AMD 2-Way CrossfireX. The two x1 slots get their bandwidth from the chipset and run up to PCIe 3.0 x1.Here we are at the end of the road, and one that not only had some unexpected turns but a road that was longer than I would have liked it to be. Mainboard manufacturers really don’t like making their hardware easy to review do they? We’ll be doing much the same as I did for the Powercolor 6800XT review and getting the miscellaneous things out of the way with first before breaking into the scoring to keep things as easy to follow as possible. Appreciate the detail of the review but disagree strongly with your priorities and I'll be buying this board anyway. Unsurprisingly there is nothing unusual or out of place here, I will make a note that the newer AMD drivers look to have fixed Gears 5 performance at 1080p where it has jumped about 10FPS. Tomb Raider results are also interesting as the system managed 121FPS average for both 1080p and 1440p.