Loctite 1831703 271 Threadlocker high strength (red) 5ml

Product Information

will make them better suited to certain applications, consult the product technical data sheets and/or Henkel representatives for further information.

It has a fixture time on steel of 30 min, brass 25 min and stainless steel 270 min making it deal for applications where migration of the adhesive must be prevented. It also withstands minor surface contaminants, such as cutting, lubrication and anti-corrosion fluids. Henkel’s LOCTITE® threadlocking adhesives prevent self-loosening and secure any threaded fastener against vibration and shock loads. The high-strength threadlocker is for use in the automotive and commercial vehicle industry, in metalworking and tool manufacturing, shipbuilding, mechanical engineering and engine construction, and electrical and electronics construction. NovaStud Eco – High Strength Threadlocker is produced from our latest non-hazardous technology incorporating a bespoke group of high purity raw materials.LOCTITE® 270 is a high-strength threadlocker for maximum efficacy in the securing and sealing of bolts, nuts and studs to prevent loosening due to vibration.

A06 is a high strength, low viscosity formulation for permanent locking of studs and bolts up to 1" (25mm) diameter. There are several different methods of addressing the problem of self-loosening and most of them include the use of mechanical devices to lock threads and maintain the desired clamp load. The gap appears tiny to the naked eye, but it is still large enough to allow side to side movement of the bolt within the nut caused by operational vibrations. LOCTITE® 270 is a high strength permanent threadlock designed for the permanent locking and sealing of threaded fasteners.LOCTITE 290 is a liquid medium/high-strength threadlocker designed for the locking and sealing of threaded fasteners. The graph shown in the data sheet shows the breakaway strength developed with time at different temperatures on M10 steel nuts and bolts and tested according to ISO 10964. LOCTITE® 270 is particularly suitable for heavy duty applications, where maximum strength is required. If using on inactive metal or curing speed is too slow, use an activator spray such as LOCTITE® SF 7471 or SF 7649. Traditional locking methods only have 15% metal-to-metal contact, leaving a sizeable air gap in the assembly.

Medium-strength applications are those that require disassembly with standard hand tools without heat on ¼” to ¾” (6mm to 22mm) fasteners for easier service and maintenance. This unique future-proof technology ensures that the product label requires no hazard symbols or risk and safety phrases, and enables the product to comply with even the most stringent health and safety requirements. When used to assemble threaded fasteners, LOCTITE® threadlockers permanently secure assemblies and eliminate fretting corrosion. Mechanical locking devices (such as split ring washers, nylon insert nuts, and serrated tooth washers) play central roles in most industry. LOCTITE 2700 is a high-strength threadlocker for maximum efficacy in the securing and sealing of bolts, nuts and studs to prevent loosening due to vibration.The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. LOCTITE® 2701 is a green, low viscosity, methacrylate-based threadlocking adhesive with high strength, especially for chromated surfaces. Two of the most popular products in this range – LOCTITE® 270 and 243 - exemplify the advances that have recently been made.

Because of its low viscosity and capillary action, the product wicks between engaged threads and eliminates the need for disassembly prior to application. Where cure speed is unacceptably long, or large gaps are present, applying activator to the surface will improve cure speed. Choosing between a LOCTITE ® red, blue, green, or purple threadlocker will depend on the specific needs of your project and the threadlocker strength you require. Indeed, this fact is confirmed by Henkel, owner of the LOCTITE ® range, which has conducted a new survey in conjunction with a nationwide provider of both car parts and servicing/repairs. The product is thixotropic, which reduces the migration of the liquid adhesive following application.

Watch what happens when a few drops of LOCTITE ® threadlocker prove to be the difference between success and failure. The limitation of all these methods is that none tackle the gap that exists between the threads of the bolt and nut. For this reason, increasing numbers of those performing vehicle repairs and restorations are turning to threadlocking adhesives, as confirmed by the new survey.