Hammerite Kurust Rust Remover for Metal. Rust Treatment and Rust Converter for Metal Interior and Exterior to Remove Brown Spots - 90ml

Product Information

Getting the right gear is the best investment long-term, but we recognise that this may mean stretching your budget.

It still offers much better protection than most of the products we tested, and the coating seems tough. Be careful not to get it confused with the liquid equivalent though, because this had a woeful result. We left sections of 1mm unpainted mild steel to gently corrode outside over the course of several months, then let them thoroughly dry before treating both sides with our products, carefully following the instructions. Kurust works by converting iron oxide to stable iron complexes and turns a blue-black colour whilst doing so. The milky fluid from the Rustins jar was certainly easy enough to apply, although it seemed to sit on our rust rather than soaking in, and took far longer than the others to cure into a paintable surface.But some minor surface corrosion had started to become visible on both sides of our sample by the end of our test period. A. Once fully dried, you can apply a top coat depending on the top coat used you may not need to use a primer. In the case of Dinitrol it's not clear if they are able to arrest the rust on their own and this may be why they are used in combination with the convertr). Hammerite Kurust Blister is a water-based rust-converter primer to stabilise rust prior to topcoat application. Oil and grease contamination will prevent the conversion First of all, a lot of the the underneath of most cars, especially Land Rovers, is contaminated with oil and grease from leaking oil seals etc.

In only three hours after the application, the rusted metal turns dark blue/ black and becomes solid. We were dubious at first because the liquid was watery when applied and seemed to want to bead off the surface rather than soak in, but after 15 minutes our sample had turned dark blue and allowed us to apply another coat. The 103 third parties who use cookies on this service do so for their purposes of displaying and measuring personalized ads, generating audience insights, and developing and improving products.Other suitable applications include BBQs, fire surrounds, garage doors, metal doors, metal garden furniture, metal gates, metal railings and radiators.

I came to the conclusion that the best competitive advantage when it comes to Rustproofing is reliability, experience and a good name. Most purchases from business sellers are protected by the Consumer Contract Regulations 2013 which give you the right to cancel the purchase within 14 days after the day you receive the item. However, any protection it offered was short-lived, and by the end of the test the unpainted side was almost uniformly corroded again.This will make it far easier to use in some locations, such as inside a wheelarch, but it could be tricky to avoid overspray on smaller areas, such as a rust bubble on the bodywork.

This product is ideal for small areas of rust, stone ships and scratches and converts iron oxide to stable iron complexes. EASY TO USE - preparation is simple - just brush away any loose, flaky paint or rust and use a small brush to apply the rust converter directly onto metal.Kurust from Hammerite takes small and large areas of rust and changes those areas into a clean, rust-free surface in just 15 minutes. If you find fault after 30 days of purchase you may wish to contact the manufacturer directly as they will be able to offer support with the product. We suggest starting with a small amount as you should not pour any unused Kurust back into the bottle.