Joined in 2023 
82 
63 About this deal
DCI P3 is a color space, introduced in 2007 by the SMPTE. It is used in digital cinema and has a much wider gamut than the sRGB. The OSD settings were adjusted as shown in the table above, as guided during the calibration process and measurements. These OSD changes allowed us to obtain an optimal hardware starting point and setup before software level changes would be made at the graphics card level. We left the LaCie software to calibrate to “max” brightness which would just retain the luminance of whatever brightness we’d set the screen to, and would not in any way try and alter the luminance at the graphics card level, which can reduce contrast ratio. These adjustments before profiling the screen would help preserve tonal values and limit banding issues. After this we let the software carry out the LUT adjustments and create an ICC profile. The default gamma curve deviation of 2% had been corrected now thanks to the profiling, reaching the 2.2 average with 0% average variation. The white point was also now improved to 6523k which corrected the slightly too cool (6% deviance) default setup. The brightness control adjustment had reduced the luminance to a comfortable level now and contrast ratio remained good and basically on spec at 959:1.Colour accuracy of the resulting profile was very good, with dE average of 0.3 and maximum of 1.1. LaCie would consider colour fidelity to be very good overall. Gradients remained mostly smooth with only a little banding introduced in darker tones. To be honest there weren’t many improvements over just our optimal OSD adjustments in the section above, and while that setup had a slightly different gamma curve, it avoided any banding at all.
The screen can accept an HDR10 input signal and supports the moderate HDR 600 standard. Thankfully unlike the pretty pointless HDR400 level, this does necessitate some form of local dimming, so it is at least capable of improving the dynamic range (contrast) when used in some ways. The number of dimming zones is limited though so don’t expect miracles. Once HDR is enabled from Windows the screen pops up a little “HDR” logo to confirm you’ve entered HDR mode. In the OSD menu you still have access to a few of the preset modes but not all of them. The default ‘Gamer1’ mode has a “Certified by VESA DisplayHDR” logo next to it now.For this you will need to install LG’s free provided ‘Calibration Studio’ software (v 5.1.4 at the time of writing).
Default gamma was recorded at a 2.2 average with a minor 2% deviance from the target of 2.2 which was very good, showing a little more deviance in the lighter grey shades. The default colour temperature was a little too cool at 6858k (6% out from our target), although not too bad. There are various panel technologies. Each has its own specific features - viewing angles, color reproduction, response time, brightness/contrast, production cost, etc. The image quality depends directly on the type of the display panel used.
Kabar Tentang 27GN950
Ultrawide Monitors: Extra-wide screens offer more horizontal workspace, great for productivity and multitasking. The average contrast ratio of the screen was measured at 994:1 out of the box which was decent for an IPS panel and basically spot on with the 1000:1 specification. We will see if this is impacted at all by later calibration. OLED Monitors: Organic LEDs provide excellent color accuracy and contrast, often found in high-end displays. So from an older non-DSC card keep in mind that the maximum refresh rate you can achieve is 95Hz, even if you were willing to drop colour depth or chroma to lower levels. This also applies at non-native resolutions like 1440p and 1080p, 95Hz appears to be the maximum allowed, at least with native screen timings.
Enjoy High Performance with LCD LED Monitors high performance for dual work as well as play purpose. The total lag measured was a very impressive 2.75ms total. The pixel response times account for around 2.5ms, and so we can say that there appears to be around 0.25ms of signal processing lag on this screen which is super low. A solid result from this display and making it suitable for fast and competitive gaming.Information about the number of pixels on the horizontal and vertical side of the screen. A higher resolution allows the display of a more detailed and of higher quality image. The operating temperature shows the safe temperature range (from minimum to maximum), within which the display will function flawlessly. Outside this range it might operate improperly and/or fail entirely. Aspect Ratio Control –the screen offers three modes for aspect ratio control. These are ‘full wide’ (which will stretch whatever the input aspect ratio is to fill the screen), ‘original’ (which will maintain the source aspect but fill as much of the screen as possible) and ‘just scan’. The ‘original’ mode will be useful for supporting non-native aspect ratios, although the 16:9 format here is very common so you might not need it much. There’s no 1:1 pixel mapping mode for those who like to use that, although since the screen scalers handles non-4K resolutions very well, that might not be an issue either. Approximate height of the display. If the manufacturer does not provide such information, the height is calculated from the diagonal and the aspect ratio. LG 5K monitors are a great option for gamers, photographers & graphic designers. Our 4K & 5K gaming monitors have an excellent resolution & high refresh rate to enhance the user experience.
Great Deal 
New Comment