Colourlock Leather Fresh Dye DIY Repair Colour, dye, restorer for scuffs, small cracks on car seats, sofas, bags, settees and clothing

Product Information

The Artificial Leather Clean & Care Kit contains everything you need for the cleaning and care of strained artificial leather and plastic surfaces. Fine work of dyeing or local gluing is easier if the mini brush is used. For surface care, we recommend using the Leather Protector. The Leather Protector stops the decay of the leather with its antioxidants, and with its UV filters the surfaces of old and valuable leathers are protected from fading. It also restores a supple surface to the leather. The leather preserver protects against wear and clothing discolouration in the use area. Only start treating old leather with Softener when the leather has completely dried after cleaning. Apply some old leather Softener to the second sponge or a clean cloth from the set and wipe the leather with it. After application, let the leather rest at room temperature for at least 24 hours so that the old leather Softener has time to soak into the leather. Do not leave the vehicle too cold or in direct sunlight! You can repeat the process if necessary. We recommend that you do no more than 3 treatments. With the Cabrio Dye Set, you can dye a faded textile convertible top. The set includes everything you need, from the top cleaner to the dye and final impregnation. keen eye for colours and lots and lots of mixing experience. This will no longer be an issue - introducing the ColourScannerPRO! The ColourScannerPRO

leathers, the covering power is not sufficient! Recoloring is not possible!Nubuk Fresh can be applied either with a sponge, a pump

Procedure

A great help are the following application videos, where the application of the products of the complete set are shown. CAUTION: Please use the cleaner exclusively on textile surfaces. Cleaner residues on glass or paint surfaces can be removed without leaving traces, as long as they are not dried. If they are dry and crystallized, they can only be removed with a lot of effort. In cold temperatures, the Elephant Leather Preserver is not easy to work with. Therefore, work at a comfortable temperature or slightly heat the preserver with a hair dryer.

suitable for several vehicle interiors and furniture sets or boat interiors (Please ask us for 1 liter set) . Elephant Leather Preserver is a conditioning grease for older leathers with a silky sheen. It preserves and impregnates the leather. In case of scratches, abrasions and slight fading (frequent entry in cars and seat area in furniture), the original colour of the leather is refreshed with our Leather Fresh. The colour can be determined either on the basis of our colour chart or on the basis of a leather sample.

Care & Cleaning Kits

Leather and Fur Wash Concentrate is suitable for washing almost every kind of leather. This can be done in the washing machine,at a low temperature (under 35 °C (95 °F), the same as for wool. Rest assured that, provided you follow the instructions, the leather will not shrink and it will come out clean and soft.Amount:

Always test any products first on a hidden area to test for colour match!Firstly, clean the leather thoroughly and prepare the surface. UseMild Leather Cleaner for normal degrees of soiling orStrong Leather Cleaner to remove heavier dirt (where the leather has been neglected for many years). Cleaning prior to treatment ensures the paint bonds to the surface well and ensures durability. Use Leather Cleaning Brush to effectively remove all ingrained dirt. Cleaning removes dirt but for long lasting results you should also de-grease usingDegreaser.Use a sponge to apply the colour evenly, working from seam to seam. Dry afterwards with a hair dryer. On small spots, a one application is sufficient. Apply multiple thin layers and dry each layer using a hair dryer.A day later, after it dries, applyLeather Protector. It gives the leather a good sheen and helps blend the repair. It contains antioxidants, which stops the leather's decay, and its UV filters protect the surfaces of old and valuable leathers from bleaching and fading. Also keeps the leather supple. Remove the excess old leather Softener with the mild leather cleaner. Proceed as indicated under point 1. Always test any products first on a hidden area to test for colour match!Firstly, clean the leather thoroughly and prepare the surface. UseMild Leather Cleaner for normal degrees of soiling or Strong Leather Cleaner to remove heavier dirt (where the leather has been neglected for many years). Cleaning prior to treatment ensures the paint bonds to the surface well and ensures durability. Use Leather Cleaning Brush to effectively remove all ingrained dirt. Cleaning removes dirt but for long lasting results you should also de-grease usingDegreaser.Use a sponge to apply the colour evenly, working from seam to seam. Dry afterwards with a hair dryer. On small spots, a one application is sufficient. Apply multiple thin layers and dry each layer using a hair dryer.A day later, after it dries, applyLeather Protector. It gives the leather a good sheen and helps blend the repair. It contains antioxidants, which stops the leather's decay, and its UV filters protect the surfaces of old and valuable leathers from bleaching and fading. Also keeps the leather supple. Apply the cleaning foam on a sponge or the brush. Never apply directly to the leather. Use the foam to clean the leather from seam to seam. If necessary, repeat the process several times. Remove the dirt and residue from the cleaner with a damp cloth and then let it dry. Always test any products first on a hidden area to test for colour match!Firstly, clean the leather thoroughly and prepare the surface. Use Mild Leather Cleaner for normal degrees of soiling or Strong Leather Cleaner to remove heavier dirt (where the leather has been neglected for many years). Cleaning prior to treatment ensures the paint bonds to the surface well and ensures durability. Use Leather Cleaning Brush to effectively remove all ingrained dirt. Cleaning removes dirt but for long lasting results you should also de-grease using Degreaser.Use a sponge to apply the colour evenly, working from seam to seam. Dry afterwards with a hair dryer. On small spots, a one application is sufficient. Apply multiple thin layers and dry each layer using a hair dryer.A day later, after it dries, apply Leather Protector. It gives the leather a good sheen and helps blend the repair. It contains antioxidants, which stops the leather's decay, and its UV filters protect the surfaces of old and valuable leathers from bleaching and fading. Also keeps the leather supple.

... and many more car leather colours!

With a regular but economical follow-up care that takes place thereafter, further treatments with the old leather Softener are not necessary. C for 1 - 2 minutes. Afterwards, the leather can be dyed normally with Leather Fresh or Leather Colour / Top Coat. After dyeing, simply peel off the thread Leather Fresh is a colour refresher (dye) for scratches, worn, or faded leather. Leather Fresh is ideal to refresh colour damages on car leather, furniture leather, leather garments and handbags. Do not use on porous leathers unless colouring the entire surface - it can make the surface appear patchy. It can be sponged on or sprayed using an airbrush. For subsequent care, take some preserver with another cloth from the set and first rub in the rag. Apply a thin layer of care to the leather with the cloth and polish if you want it to shine.