DC-1520 15V 2a AC-DC 5.5mm x 2.5mm power supply adaptor quality charger UK

Product Information

Current too Low – If the adapter has the correct voltage, but the adapter’s rated current is lower than what the device input, then a few things might happen. The device could power on and draw more current from the adapter than it’s designed for. This could cause the adapter to overheat or fail. Or, the device may power on, but the adapter may not be able to keep up, causing the voltage to drop (see voltage too low above). For laptops running on undercurrent adapters, you might see the battery charge, but the laptop is not powering on, or it may run on power, but the battery won’t charge. Bottom line: it’s a bad idea to use a lower current rating adapter since it could cause excess heat. Each AC/DC power adapter is specifically designed to accept a certain AC input (usually the standard output from a 120 V AC outlet in your home) and convert it to a particular DC output. Likewise, each electronic device is specifically designed to accept a certain DC input. The key is to match the DC output of the adapter to the DC input of your device. Determining the outputs and inputs of your adapters and devices is the hard part. One minute, I get a slow charger warning. The next minute, it stays stable, not loosing charge, but not gaining charge either. Your article starts out describing my dilemma almost to a ‘T,’ then never does really answer the question, how do I know which adapter will work with which device.

Voltage too high – If the adapter has a higher voltage, but the current is the same, then the device will likely shut itself off when it detects an overvoltage. If it doesn’t, it may run hotter than normal, which can shorten the device’s life or cause immediate damage. Current too high – If the adapter has the correct voltage, but the current is greater than what the device input requires, you shouldn’t see any problems. For example, if you have a laptop that calls for a 19V / 5A DC input, but you use a 19V / 8A DC adapter, your laptop will still get the 19V voltage it requires, but it will only draw 5A of current. As far as current goes, the device calls the shots, and the adapter will have to do less work. My original AC Adapter for my Sega Genesis model 2 (10V 0.85A DC), so I found among my junk box (yeah, we all have one, right? Lol) a replacement (9V 0.2A DC). That said and considering the info perfectly explained on this post, I want to know if this new adaptor will harm my console?

Fudging It: What Happens if You Use the Wrong Adapter?

The other important term to know is polarity. There is a positive pole (+) and a negative pole (-). For an adapter to work, the positive plug must mate with a negative receptacle or vice versa. By nature, direct current is a one-way street, and things won’t work if you try to go up the downspout.

I since found out that as well as having a plug that converted US to UK, it should also have had voltage step down capability, so we bought one of the right type and all was well. But what if you accidentally (or purposefully) use the wrong adapter? In some cases, the plug won’t fit. But there are many instances where an incompatible power adapter will plug into your device. Here’s what you can expect in each scenario: And other guys were saying that there’s a “tolerance” range of 2V on all systems; that you can power a Sega Genesis model 2 with a 12V 1A DC without harming the console and that they have been doing that for years!You might find both the voltage and the current elsewhere on the device, on the bottom or inside a battery compartment cover, or in the manual. Again, look for the polarity by either noting a + or – symbol or the polarity diagram. e.g., Samsung makes TVs, but doesn’t make wiring used inside their tvs or the power, AV, etc cords. Parts & supplies are outsourced from third party manufacturers. Is there such a thing as a (relatively) high current variable voltage adapter which is capable of furnishing (relatively) high current levels, with voltages that can be incrementally increased from very low to levels that seem to make a device operate properly? Of course, it would be a test instrument and not an adapter per se. But such a device might help a user determine what the actual input voltage a device needs without trying random power adapters and taking a chance on frying the device which it is intended to power up.

For example, the Samsung Galaxy Note 3’s power is 10.6W (5.3V×2A) and a powerbank of two port which the output is the same but the current is different. The output one is 5V/1A and the other one is 5V/2.1A.I feel like I'm blowing money on chargers and USB C Cables for no reason, because, as soon as I use them, all I get is "Slow Charger". Doesn't matter what make or model I use. Same thing every time. If you multiply the voltage by the current, you get the wattage. But the number of watts alone won’t tell you if the adapter is right for your device. Reading an AC/DC Adapter Label

Remember: the input of the device should be the same as the output of the adapter. This includes polarity. If the device has a DC input of +12V / 5.4A, get an adapter with a DC output of +12V / 5.4A. If you have a universal adapter, ensure it has the proper current rating and choose the correct voltage and polarity. Fudging It: What Happens if You Use the Wrong Adapter? In practice solid chargers support multiple Voltages with Amps that make sense, the device its connected to simply tells the charger which it accepts.Most are either a brand we never heard of or just a generic “ac adapter” where you’d otherwise see a brand. But i did decide to give it a try because when i opened the plastic box of the Creative AC Adaptor, i found that it had only a stepdown transformer inside and i concluded that the AC TO DC Converter circuit had to be located inside the Woofer box to which the AC 11.5V 1600mA was to be fed.