NRS Healthcare Powder Coated Standard Bed Stick

Product Information

Bed rails that may weaken over time, especially when bed occupants frequently shake or rattle them. using bed rails designed for a divan bed on a wooden or metal bedstead, this can create gaps which may entrap the occupant The horizontal rail can be used in combination with a bath board. The user may benefit from holding the rail while they sit on the board, then turn and lift their legs in and out of the bath Standards such as these are primarily intended for manufacturers to demonstrate that the products they supply are suitable to be UKCA, CE or CE UKNI marked and placed on the market. The dimensions and measurements that they specify may not be appropriate to conduct in a clinical environment (for example requiring the use of tools with precise dimensions and mass) and may not assure safety if they are uncritically applied to all bed users. Vertical rails may assist when pulling up into a standing position or for just maintaining balance.

A high contrast finish may be helpful if you have low vision - choose grab rails in a colour that contrasts with the wall it is to be installed on. Compliance to this standard requires the use of specific measurement tools, rather than basic distance measurements alone. It is intended to be used by manufacturers. For this reason, it is recommended that end users do not use solely these measurements as the sole basis for evaluating suitability of a bed rail installation. Adjustable or profiling beds usually have compatible integral type bed rails available from the manufacturer; these are preferable to other systems that may not fit as well. In all cases it is essential that the selection process follows a risk assessment considering the needs of the bed occupant and the use environment.You don't have to physically buy the goods in person. If your parent, guardian or wife or husband buys the goods and services for you, then you won't be charged VAT. What counts as personal or domestic use? When purchasing or making assessments of bed rails for children or adults with atypical anatomy, seek guidance on suitable rails from the manufacturers and assess their compatibility with the size of the individual and the specific circumstances of use. A standard for medical beds for use with children was published in 2017: footnote 4 older beds may not comply with this standard, and so may have larger gaps which are inappropriate for use with children and small adults (See section Standards). This should be considered as part of the risk assessment. using unsecure fittings or designs which permit the bed rail to move away from the side of the bed or mattress, creating an entrapment hazard A child slipped feet first between the bed rail and the bed. The gap was not large enough for the child to pass completely through and the child was trapped at chest level and died from postural asphyxiation.

If you are struggling with caring for yourself, or your carer is struggling to provide care for you, consider asking for a health and social care needs assessment. Since the Care Act 2014 (Great Britain. Parliament 2014) came into power in April 2015, anyone who appears to need care and support can request an assessment from their local council, irrespective of their income or savings. The Act also places a statutory duty on local authorities and the NHS to support individuals to take steps to prevent their ill health or care requirements from getting worse. These strategies for prevention can include the early provision of equipment and services to help prevent, delay or reduce the development of further need for care and support, which would include the provision and fitting of grab rails depending on the cost. Using one rail: The rail is fitted starting at a point approximately 25mm forward of your knee and approximately 50-70mm above your elbow (when seated on the toilet with your arms down against your side), at an angle running at 45 degrees forwards and upwards away from you. This may help you to support the weight of your arm whilst pulling with your hand higher up the rail. See above diagram.Not all of our products are eligible for VAT relief, so we are obliged to charge VAT for those products even after you complete this form. is there a gap between the bed rail and the side of the mattress, headboard or footboard that could trap the bed occupant’s head or body?

Rails set at an angle can help a person who needs a steadying support - e.g. to stand from a bath board to shower. The rail can be placed at an angle of 45 degrees up and away from the user. This keeps the wrist in a neutral position. It is not necessary to lean far forward to grasp the rail at the lower end and the hand can travel up the rail to maintain the support once the person is standing. using only one side of a pair of bed rails when the other side is against a wall if this is not specifically permitted by the manufacturer – the single rail may be insecure and move. Some manufacturers supply a mattress retainer for use with single sided bed rails which reduces this risk. Like our other recommendations for the best bed rail for elderly and disabled patients, this rail is easy to install by sliding under the mattress. However, the support legs on the Smart Rail provide added stability.Bed rails should be maintained in accordance with the manufacturer’s recommendations in the instructions for use. Examples of common types of damage include: A bed rail intended for use on a domestic divan bed was used on a hospital type bed. This produced a large gap between the bottom of the bed rail and the bed when the mattress was compressed. Advice – If bed users are known to be in a confused state, then bed rails may serve to increase the overall risk of injury. A risk assessment could have identified the hazard of leaving bed controls accessible and the potential for an increased fall height and of the occupant having sufficient mobility to climb over the bed rails. To thoroughly inspect these areas, it may be necessary to remove duvets, blankets, sheets, and valances. An adverse incident is an event that causes, or has the potential to cause, unexpected or unwanted effects involving the safety of device users (including patients) or other persons. Adverse incidents can be caused by: