Fox Mud Guard MY21 36-38

Product Information

and sets a new benchmark for confidence, performance, and durability. Welcome to the big time. Smoother stiffer and more tunable than ever before Floating Axle legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, Finance is subject to application, financial circumstances and borrowing history. Performance Cycling Limited FRN: 720557 trading as Tredz are authorised and regulated by the Financial Conduct Authority. We are a credit broker not a lender – credit is subject to status and affordability and is provided by Mitsubishi HC Capital UK PLC. Terms & Conditions Apply. ounce of material in an effort to optimize this critical ratio. Our all-new lower leg design pulls out all the

Finally tighten the bolts to the torque settings below: TORQUE SETTINGS: FOX, MARZOCCH & OHLINS = 1nm | SR SUNTOUR = 2nm we’ve taken GRIP2 to the next level by adding our patented VVC technology to the high-speed compression circuit. Our lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button. Pressure build-up RapidRacerProducts Ltd accepts no liability for any damage or injury caused due to improper fitting or use of our products We all crash. Sometimes hard, and sometimes even harder! There is a solution to minimize the risk of a head and brain injury, however – go and get the best helmet you can find that reduces both rotation and impact energy to your head and brain!stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern Select the correct bolts for your fork (details below) and run these into the threads WITHOUT the mudguard which will 'PRIME' and clean the threads before fitting, this part is important (YOU MAY NEED TO RE-TAP THE THREADS IF DEBRIS / PAINT IS LEFT IN THE THREADS FROM THE MANUFACTURE OF THE FORKS) BOLTS: FOX = M3 (2 bolts) | OHLINS = M4 (3 bolts) | SR SUNTOUR = M6 ( *1 bolt) forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques You can also change the height of the mudguard by 6mm through the slots for more clearance. NOTE: Highest position offers the most stability with the best mud clearance Our GRIP2 damper is the benchmark for unparalleled ride quality and ultra-precise on-the-fly adjustability. For 2021,

and 40 floating axles, but the end result is the same – perfect alignment and perfect performance. Lower Leg Channels Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to The ProGuard BOLT ON will fit most fork models listed below if they have the *THREADED HOLES at the rear of the fork brace (DISK BRAKE ONLY): WHEELS: 26” 27.5” 29” TYRES: up to a 3” tyre BRAKE / OFFSET: MINIMUM 44mm HUB: STD & BOOST FORKS: VVC is a proprietary variable valve control system that allows for external fine-tuning of suspension performance. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs,in the lower legs dramatically decreases fork performance, preventing full travel from being achieved, and IMPORTANT: You must apply the rubber adhesive side pads to the recess on the mudguard side wings, they protect your fork legs and provide vital stability and resonance damping their unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange