Joined in 2023 
82 
63 About this deal
Your PC is providing power to other devices, so it has temporarily limited the power it provides to the device you just connected to. Dust or dirt inside the USB port on your device prevented the charger from being inserted correctly. Your PC (or phone) has a low battery, so it has temporarily limited the amount of power it can provide to the device.
A PC (or phone) with USB Type-C connectors has larger power limits. If the connector supports USB Power Delivery, it can charge even faster at greater power levels. In the same family, Satechi also offers the Pro Hub Mini (the same as the Max but without the HDMI port) and the Pro Hub Slim (which swaps the Ethernet port for an extra USB-A port, and boasts 10GBps USB-A and USB-C ports compared to the Mac and Mini’s 5Gbps). If you don’t need wired Internet access, the Pro Hub Slim edges out the Pro Hub Max. If you don’t need more than one external screen or you want to save the USB4 for passthrough charging only, consider the Pro Hub Mini or the Plugable 5-in-1 USB-C Hub reviewed below..
What you need
Your iPadcan output Dolby Digital Plus audio streams via HDMI, but not Dolby Atmos. Also note that your iPadwill play HDR10 or Dolby Vision content via HDMI when HDMI 2.0 adapters that support these formats become available. Note: This applies to all the error codes shown in Device Manager except error Code 28 (drivers for the device aren’t installed). The Anker PowerExpand is special as it offers an HDMI port that supports 4K 60Hz resolutions, where most are limited to 4K 30Hz. For 4K 60Hz resolution, your device must support DP 1.4. This includes MacBook Air (from 2020), MacBook Pro 15in (from 2018), MacBook Pro 16in (from 2019) and iPad Pro (from 2018). Your iPaduses the DisplayPort protocol to support connections to USB-C displays 1 with these resolutions: It should allow video output and passthrough charging simultaneously. In a test connection from a MacBook to an LG 4K UltraFine Display, the MacBook was able to output video to the monitor, while the monitor was able to provide power to the MacBook, all through the single connection. Owners of the 14- and 16-inch MacBook Pro and M2 Air can charge via the MagSafe connector at the same time as using the Pro Hub.
USB Type-C has a new feature called Alternate Modes. If your USB-C cable has this feature, you can connect to non-USB devices that support the same Alternate Mode. For example, if your USB-C cable has the Thunderbolt Alternate Mode, you can connect to Thunderbolt devices. There's no setting to turn on—your device automatically uses the appropriate mode if it's supported. Chargers that don't have a standard USB Type-C connector might use a proprietary, nonstandard connector that your PC (or phone) doesn’t support. Chargers that don't have a standard USB Type-C connector might use a proprietary, nonstandard connector that your PC doesn’t support.The Alternate Mode feature must be supported on the PC or phone's hardware and software, and the connected device or dongle. You might also need a specific USB-C cable. iPad Pro 11-inch (3rd generation) and iPad Pro 12.9-inch (5th generation) also support Thunderbolt displays.
Look for hubs that offer passthrough charging, so you can charge your laptop even though you are using up one of the laptop’s USB-C ports for the hub itself. Most don’t ship with a charger, so you’ll need to add your own, and remember that it needs to be a 100W charger to give 85W and above charging if offered by the hub. Lower wattage chargers are fine but will limit the hub’s charging potential. To connect your iPadto high-resolution displays, use a USB-C cable that supports high-bandwidth connections, such as the cable included with the display, the Belkin Thunderbolt 3 Cable (USB-C to USB-C),or the Apple Thunderbolt 3 (USB-C) Cable(sold separately). 2 If you have two iPadmodels with USB-C ports, you can connect them directly with a USB-C cable. One iPadwill draw power from the other. If you want to change which iPadcharges, unplug the USB-C cable and then reconnect them. Make sure the device or dongle is connected to the USB-C port on your PC that supports the correct Alternate Mode. For example, if you're connecting a Thunderbolt Alternate Mode device, make sure you connect to the USB-C port that supports Thunderbolt™. To charge faster, your PC (or phone), charger, and cable must all support the industry standards. Your charger and cable must also support the power levels your PC (or phone) requires for the faster charging. For example, if your PC requires 12V and 3A for the fastest charging, a 5V, 3A charger won’t give you the fastest charging.Up to 5K for iPad Pro 11-inch (1st and 2nd generation), and iPad Pro 12.9-inch (3rd and 4th generation) There's a driver in the device you connected to that isn't supported in the version of Windows 10 Mobile your phone is running. For information about the supported devices, see Universal Serial Bus (USB). Connecting directly to two of the MacBook’s Thunderbolt ports, it boasts a bunch of ports that should be enough for most of us. The hub receives 40Gbps from each of the Thunderbolt ports on the Mac (so a total of 80Gbps). 40Gbps is used for the USB4 pass-through port, while the second Thunderbolt port distributes 40Gbps of bandwidth to the rest of the ports on the hub.
Great Deal 
New Comment