Xbox One S SLIM Replacement Blu Ray Liteon DVD Disc Drive DG-6M5S-01B

Product Information

Work your way along the side of the Xbox, ideally using a second spudger. Make sure the first spudger remains in the gap throughout the entire process. Even as the gap gets wider and looks safe, don’t trust it. The case could suddenly snap shut at any point, and you don’t want that to happen. Games take up the same space on the SSD, no matter how you got them. But that conversion shouldn’t compromise the functionality of the physical copy in the process. Microsoft tried that once, and trying it again would only prove to ruin the goodwill its accumulated over the past several years. You’ll see the optical drive, connected by a set of ribbon cables. Remove these carefully, and take your time not to damage the connectors. You’ll need them in good condition to reassemble the system. Replace the PCB If you are using "Instant-On" power mode, change the power settings to "Energy Saving" mode. After the settings have been changed, power cycle or restart your console. Here's how to access and change the Power Settings on your Xbox ONE console. The Generic Blu-Ray Disk Drive Replacement costs less, and comes with nicer drivers. Then again, it’s refurbished. It’s tougher to set any firm expectations as far as long-term reliability goes.

We’re about to review three of the best Xbox One replacement disc drives on the market. To find out which one is best, we’ll talk about how they’re built, and what they ship with. We’ll also talk about how to change an Xbox One optical drive. The process isn’t all that complicated, and it can be done in less than half an hour. That said, you’ll need to be comfortable with soldering electronics. If you’re less than eager to solder your disc drive, you may want to hire a professional to do the job. Clean the disc with a soft, clean cloth. Always hold the disc by the outer edges without touching the top or bottom surfaces. Once you have the Data & Power cables narrowed out you can move on to the internal components of the disc drive. Inspect the internal components of the internal disc drive for: The PCB is the big green circuit board inside of the housing. It’s connected to the other components via three ribbon cables. As when you were removing the optical drive itself, be careful. The connectors are easy to damage, which can make it impossible to properly reconnect your cables.Lift the metal case up gently, but don’t remove it entirely. It will still be connected via the WiFi board cable. Locate this cable, pull it free of the motherboard, and you can remove the metal case. Xbox Game Pass: sold separately; game catalogue varies over time. See xbox.com/gamepass and https://www.ea.com/ea-play/terms and https://www.ea.com/ea-play for details. If insert a disc into your Xbox ONE but it does not respond and pull the disc into the disc drive, you most likely have an internal hardware problem. To troubleshoot this further you will need to disassemble your Xbox ONE console. Make sure your console has the newest software version installed. To see your console's current software version or to see the status of the last update, follow these steps:

If you insert any type of disc (game, blu-ray, etc..), but your Xbox ONE still displays the "insert disc" message, displays an error, or does not respond this could indicate an internal hardware issue with the console. However, in early releases the "Instant-On" power mode was known to cause disc read errors. Here are some things to help you determine if you console needs repair: The CHENLAN Original Lite-on Replacement Disc Drive is an aftermarket drive for the Xbox One. It’s made from a lot of the same components, though, including the same housing. It’s also built to the same specifications, so you won’t have any compatibility options. Despite being manufactured by a third-party company, it still works fine right out of the box. Below are several known issues. Select the issue which best describes your scenario, and use the steps to troubleshoot the problem. As with all patents, nothing is confirmed. The device presented in this patent might be years away from making it to market, or may never see the light of day. If you have followed the steps above and are still having trouble, your Xbox ONE's disc drive is in need of further inspection or possibly repair. You will need to disassembly your Xbox ONE drive and inspect it for the following:

CHENLAN Original Lite-on Replacement Disc Drive

If your Xbox ONE accepts the disc into the drive (you are able to insert into the console), but the console still gives you the "Insert Disc" message on the home screen, your console may have an internal hardware problem. See Scenario 2 above for more troubleshooting steps. Try using a different Xbox ONE (if possible) to load/play the disc. If you have access to another console such as a friends or relatives, try the disc in it and see if you get the same results. If the disc works fine on the second console, your console may need repair. Try a variety of discs in each console to help you determine if you have a disc problem, or a console problem. If you determine you have a console problem, see the Xbox ONE Disc Drive Solutions below.