Creality HALOT ONE Resin 3D Printer with 5.96 inches 2K Mono LCD, Intergral Light Source and Fast Printing, Precise Z-axis Module and WiFi Control, Assembled Out of The Box

Product Information

The LD-002H is an open material 3D printer, meaning it can print with any brand of resin, not just the ones made by Creality. This gives you a great amount of freedom, but comes with its own challenge of knowing which resins are compatible, and how to print them. NEW ITEM: Hi-Res 6.08” 2K monochrome screen: The Creality LD-002H utilizes a 1620*2560 monochrome LCD for layer exposure. Not only does it increases print speed up to 200% or more, but the life of the screen is increased by up to 400%. LD-002R & LD-002H Parameter Printer Resins contain additives such as pigments and photoinitiators which settle down while not in use. They need to be shaken or stirred to disperse them probably throughout the liquid. Upgrade UV Light Source Module: The Creality LD-002H is equipped with a UV integrated light source, providing improved light transmission. The UV light achieves 8000uw/cm². A consistent UV light source is the most important factor in printing. Thanks to the Creality LD-002H’s improved printing speed, 2K (2560 x 1620 px) resolution, and an XY-axis positioning accuracy of just 0.051 mm, the machine can print dimensionally accurate and well-detailed models with outstanding surface finish. It is equipped with a smart resin vat that features resin level indicators for optimal performance.

If the recommended settings gave you a good starting point for printing, press the plus button next to them. This helps the next person know what to expect. (You need to be logged in to vote.) Preparing for Resin Printing - setting up an enclosure, heating, ventilation, filtration, and cleaning equipment I had the chance to test this new Creality LD-002H printer among the first ones, I had already been pleasantly surprised by the old 2R version, and it is also the case for this 2H.

The following settings have been crowdsourced from community forums, manufacturers, Maker Trainer users etc. Easy Leveling System: Simply lower the printing platform atop an ordinary piece of paper. Then hand tighten the leveling nut to complete the leaving process. Here is my very first print, with an exposure time of 2sec per layer. The rendering is really clean.

Lower the lift speed (60mm/min is a good baseline), increase the base (aka initial, bottom, burn-in) exposure, raise the ambient temp to ≈25°C (or as specified), and lightly sand the build plate. Here comes the good news. The new print LD-002H adopts an upgraded UV Light Source Module and an upgraded transmission system. Compared to the LD-002R resin 3d printer, it greatly improved the stability of the light source and the success rate of printing. Below are some of the models 3D printed with the Creality LD-002H for you to see what to expect from the printer. Finally, on the aesthetic side, the machines look very similar, the chassis of the machine is globally the same, seen from the outside you will only notice the colour of the cover has changed, red for the new LD-002H, and orange for the LD-002R.It takes 6 to 18 seconds for the Creality LD-002R 3d printer to print each layer. So if your son is waiting eagerly to have a new toy, or you want to produce more products for your company, the LD-002H resin 3d printer is a good choice.

Air Filtration System with Activated Carbon: Activated carbon can effectively reduce the emission of the odor from resin and is more environmental-friendly. While it is not dangerous to print expired or incorrectly stored resin, the chances of success are much lower. Even if you succeed to print, the material will probably have lost some of its original qualities. Resin 3D printing is great, with a much better print quality and level of detail than a filament FDM printer, but you will need to spend some time cleaning your parts, either with IPA alcohol, or with water if you use waterwashable resin.You can always figure this out through some experimentation, but using ones which are already confirmed by other users can save you a lot of time and frustration. As stated before, the parameters above are not a replacement for resin validation, they are merely a good starting point for it.