Joined in 2023 
82 
63 About this deal
If your phone or tablet is running Android 7.1 or lower, and you wish to use USB, then you need to use a special (older) firmware (FW version 0.26). You can install the appropriate version of Hardware Manager tools from the following locations: Cloud-search profiles" look for the latest and best fixture-profiles from the program itself, no scanning of Dropbox anymore PC: https://storage.googleapis.com/nicolaudie-eu-tools/Version/HardwareManager_219fe06c-51c4-427d-a17d-9a7e0d04ec1d.exe I was new to gig lighting and had been using a simple ADJ Hexcon controller to control simple light colours and strobes but had recently acquired some moving lights and some blinders and wanted to put together a more interesting performance.
Do you own DMX lighting fixtures that you aren’t currently getting the most out of? Do you want to take control of your rig, but don’t understand DMX programming or simply can’t find the time to spend programming a complicated lightshow? Well ADJ’s exciting new mydmx GO lighting control system could well be just the solution you are looking for! FCC STATEMENT. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC RADIO FREQUENCY INTERFERENCE WARNINGS & INSTRUCTIONS. This product has been tested and found to comply with the limits as per Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device uses and can radiate radio frequency energy and, if not installed and used in accordance with the included instructions, may cause harmful interference to radio communications.
To connect with existing users and ask specific questions, join the myDMX Facebook group: https://www.facebook.com/groups/MyDMX/ Added possibility to completely close the pallet/fixture/fader window, with an option to restore it from the edit window (next to auto hide pallets option) Unlike any other hardware or software DMX control system on the market, the mydmx GO app requires absolutely no programming but can be used to create stunning synchronized lightshows across any combination of DMX-compatible lighting fixtures. It is supplied pre-programmed with a wide variety of easily customizable effects that can be used with any type of fixtures. Flexible : In addition to the 3-pin and 5-pin DMX connections, it also has a connector for wiring up special switch triggers around the stage - I haven't used that yet but can't wait to give it a go (perhaps triggering foot switches to strobe scene triggers). To use MIDI with your Android device, you need to be running a minimum OS of Android 6 (Marshmallow).
However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be deter- mined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following methods: Reorient or relocate the device. Increase the separation between the device and the receiver. Connect the device to an electrical outlet on a circuit different from which the radio receiver is connected.. Consult the dealer or an experienced radio/TV technician for help. INTRODUCTION. What is DMX? DMX is a universal lighting control system. It stands for Digital multiplex', and is a digital data system that allows a DMX controller to take control of any DMX compatible device, regardless of the manufacturer. DMX devices are normally referred to as Fixtures' or Drivers'. Each fixture has a DMX. input and a DMX output. Up to 32 fixtures can be daisy-chained. For connections of more than 32. fixtures, a DMX splitter must be used. Each DMX device uses a certain number of channels. For example, there may be 1 channel to set the gobo, 3 channels to set the color, 2 channels for movement, 1 channel to control the dimmer, etc. myDMX-RM is a great solution for a lighting designer to leave at a venue so that their staff can trigger lighting scenes without the use of a computer or myDMX software. Ability to merge previous patched fixtures when using the Import facility. (basically when you import a show, it will not overwrite the patch, rather it’ll merge the patch of the imported show with the patch of the open show)Dimensions are an approximation. For guaranteed compatibility we recommend an Android tablet with a screen size of 8 inches or higher. Using DMX to synchronize and control a lighting system allows a collection of disparate fixtures to be united into one awe-inspiring show. However, for a long time DMX control required a high level of technical knowledge and expensive equipment or software that made it inaccessible to many lighting users. ADJ’s popular myDMX software control system changed that; it is not only affordable, but easy to use, opening up the power of DMX to anyone. Now, with the release of myDMX 3.0, you can take your lightshow to the next level using powerful new features from software that is still incredibly easy to use.
If you wish to connect your Android phone or tablet to a myDMX GO using USB, and your myDMX GO is running the latest firmware (FW version 1.0 or greater), then you need to have at least Android 8. div id="{%=id%}" class="reveal-modal small h-alert-modal-popup" data-reveal>