Roland Tr-6S Compact Drum Machine

Product Information

Drive is the least extreme of all the choices, and comes with a two-band EQ that is both pre- and post-gain. This effect works well on nearly all of the instruments. Crusher, as you’d expect is really a bitcrusher and has a built-in filter. This one works great on hi-hats and other high frequency material. Next, Saturator is slightly less extreme than the Drive effect and has even more control. Please note that when you execute "ALL" or execute "KIT" or "PTN," then depending on the selected parameter, created presets and the settings on the TR-6S are returned to their factory-default state. The sound of today's music owes a lot to the classic step-sequencer—particularly the "TR-REC" variety found in early Roland drum machines. The TR-6S employs the same tried-and-true approach, enhanced with realtime recording and modern features like sub-steps for ratcheted parts and motion recording for rhythms that move. There’s a Sensitivity threshold setting that’s worth experimenting with, according to what sounds you’re using. And finally, there’s a Comp + Drive setting, which combines compression and overdrive into one effect. 10. Get a Reload of this

In no event shall Roland be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this product. The foregoing provision is effective even if Roland has been advised of the possibility of such damages. Even if the SOFTWARE has any material, verifiable, and reproducible program errors, Roland shall have no liability to modify such errors. If you are using a SD card to perform the update, carry out the procedure while no USB cable is connected to the TR-6S. The maximum length of a single audio file that can be imported is approximately 180 seconds (at 44.1 kHz).

c) If there are any differences between the terms of this License Agreement and the OSS License, the OSS License shall prevail and the terms of this License Agreement shall not apply. The TR-6S is a also a high-quality USB audio/MIDI interface, perfect for mobile or minimal production setups. And it fits in even the most space-starved studios or live rigs, so you can turn life into music whenever inspiration strikes. Please verify the version number "1.51" with the procedure described in "How to tell the version" part of this document.

This is a legal agreement between you (an individual or a corporation) and Roland Corporation (herein referred to as "Roland") regarding the usage of this software product (herein referred to as "SOFTWARE"). Please read carefully the terms of this License Agreement before installing or using the SOFTWARE. By installing, copying, or starting the use of the SOFTWARE, you hereby consent to the terms of this License Agreement. To keep the TR-6S's settings unchanged and return only Kits or Patterns to their factory defaults, select "KIT" or "PTN."

If "Updating Panel" appears, wait until the message "Completed" appears on the display, then reset the power again. Press the [ UTILITY ] button and use the cursor buttons to select "Factory Reset," then press [ VALUE ] knob.

Please install the extracted system program file into your TR-6S according to the following procedure. The sound of today's music owes a lot to the classic step-sequencer—particularly the “TR-REC” variety found in early Roland drum machines. The TR-6S employs the same tried-and-true approach, enhanced with realtime recording and modern features like sub-steps for ratcheted parts and motion recording for rhythms that move.a) Any provision of this Agreement which is prohibited or unenforceable in any jurisdiction shall be ineffective to the extent of such prohibition or unenforceability without affecting, impairing or invalidating the remaining provisions hereof. Roland can not reply to inquiries regarding this system software updater. Please read the instructions completely, and please note that you should use the SOFTWARE AT YOUR OWN RISK. Executing the procedure in "Returning to the Factory Settings (FACTORY RESET)" causes the tone data/settings in the TR-6S to be lost. Unauthorized copying, uploading to another network, distributing, modifying and/or attaching this software to other media or any other sales item is expressly forbidden. a) You may only use the SOFTWARE on a specific single computer at one time. Use of the SOFTWARE shall include loading the SOFTWARE into temporary memory (i.e., RAM) or installing the SOFTWARE into storage media (i.e., hard disk) of the computer on which you will use the SOFTWARE.

Roland grants you the following non-exclusive rights to use the SOFTWARE in accordance with the terms of this License Agreement. b) The OSS, etc. in the case of the preceding paragraph shall be subject to the OSS, etc. license (herein referred to as "OSS License"), and you shall comply with the OSS License. Never turn off the TR-6S's power while the update is in progress. Otherwise the system program or the TR-6S itself may be destroyed.

Owner’s Manuals

This can vary depending on the specifications of the batteries, capacity of the batteries, and the conditions of use. Roland reserves the right to terminate this License Agreement if you fail to comply with any of the terms of this License Agreement. Upon such termination, you shall immediately stop using the SOFTWARE. Roland makes no warranty, either expressed or implied, with respect to any of the software, including, without limitation, any implied warranties of merchantability or fitness for a particular purpose. At the initial powerup following an update, the message "Updating Panel" sometimes appears on the display. We regret that we are unable to answer questions regarding the update procedure using this system program. Please perform the update responsibly, following the directions given in this document.