Sealey BM24RS Rubber Floor Squeegee with Wooden Handle, 600mm, Brown

Product Information

They work by directing water towards the drain or outside so that the puddles thin out enough to evaporate dry in no time.

The negatives are something which we have had to learn over time. Our main criticism revolves around the squeegee blade. Firstly the blade which comes with the squeegee handle is too soft so immediately you need to change that out. Secondly the blade is designed to hang slightly over each edge of the handle, as the original blade is too soft, this creates a dragging defect on each side of your screen. Red: Softer General Blade. Suggested mesh count is 15T- 77T. Ideal for textile printing and high opaque designs and some general fine lines and detail. Suitable for Plastisol and Water Based inks. The negatives are minimal but if we must think of something that annoys us about this squeegee it would be the noise it makes during a print run. I can’t put this into words so please watch our YouTube video where we will demonstrate this little irritant in full. If you’re needing it to clean windows or glass then a soft, scratch-free foam head is ideal. An extendable handle as well will help reach up into those corners.Red: Soft Blade. Suggested mesh count is 15T-55T. Ideal for textile printing and high opaque designs especially light onto dark printing. Suitable for Plastisol Inks. What do you need this tool for? Whether it’s a wet room, tiles, laminate, wood, concrete or any other surface, the squeegee design needs to complement this. Because of the secure fit of the head to the handle, this squeegee isn’t very flexible. This makes it harder to use in tight spaces so better for an open area like a garage or an open plan wet room and shower squeegee. The double foam lip is scratch free and can be used on any surface from laminate to wooden floors, wet room floors, and even heavy duty floors like in the garage or patio. The double foam wiper will be sure to remove all water and there is a non-slip rubber handle for ease of use.

The positives of the metal ergonomic handled squeegee is the comfort to print with it, the lightweight feeling, the sturdy structure, the ability to change the blade easily… the list goes on! The metal handle squeegee is number 1 for a reason! So much so that we are currently in the process of exchanging (nearly) all of our squeegees over to the metal ergonomic handles. The positives of a DIY squeegee is that you can adapt the shape and length of the handle and choose your squeegee blade to suit your printing style.With all the different rooms in your home, it can be a bit of a nightmare to find the correct tools for cleaning everything properly. A vacuum cleaner may work well on dry surfaces but what about wet areas? Be cautious when using any product on your vehicle if it doesn’t specify that it’s safe to do so. If the material is slightly rough you can end up scratching the paintwork which is very expensive to fix. Only use products on a car that are designed for the job. Should I put the head in the dishwasher? Best for Textile Printing – We recommend 65 Red if printing onto dark garments. We recommend 75 Green for printing onto light garments and for general purpose printing. If it’s concrete or paving slabs then a heavy-duty rubber is required to ensure the head doesn’t wear away after a few uses. Cost