No Neutral Wire Required, SONOFF ZBMINIL2 Zigbee Smart Light Switch (2 Way), Works with Alexa, SmartThings Hub, Google Home&SONOFF ZBBridge-P, ZigBee Hub Required- A Certified for Humans Device

Product Information

With its small form factor and the ability to connect to an external switch, the ZBMINI-L2 can transform an ordinary switch that has only the L line into a smart switch as shown in the picture above. It’s very convenient for houses where family members are familiar with traditional switches, e.g. elderly people, and the newer generation that may be more tech-savvy can enjoy the extra features enabled by the mobile app such as scheduling, timers, count-down, and simple automation by working with other devices. So it’s the best of both worlds! ZBMINI Extreme operation instructions

With the original PR, this would introduce an UNSUPPORTED_ATTRIBUTE error on for example Heiman HS2SK, and no readings could be fetched from the device.Provedení modulu bez neutrálu sebou nese ale jeden problém. Takové zařízení nefunguje jako tzv. Zigbee router (tzn. nepřenáší povely kooordinátoru dál), ale pouze jako tzv. koncové zařízení (RFD). Což je u takto ne zcela standardně napájeného zařízení pochopitelné. Podle některých zdrojů se takové zařízení může (cituji) v Zigbee síti chovat někdy „škodlivě“, a může zvyšovat zátěž Zigbee koordinátora. A v konečném důsledku oslabuje „stabilitu Zigbee sítě“. A to je možná kámen úrazu, čtěte dál. Nový modul Sonoff ZBMINI-L2 Extreme vůbec nespolupracuje s Philips HUE Bridge Revert unnecessary removal of old code that reads the position after sending stop command (Koenkk#4037) The shell can be opened by separating the shell down the middle. Inside is a small 8A relay which partly allowed for the significant size reduction. Zigbee communication is running on a modern Silabs EFR32MG22 chip. Add 5412748727395, 5412748727388 -> 5412748727371, PROLIGHT_REMOTE_CONTROL -> 5412748727388 (#4144)

First of all, sorry if any term is not correct. I am starting with the DIY of home automation and electrical issues, although I know something, I am not a professional. Also, I am not native english speaker person. Service switch can break easily, probably due to the casing that is part of it, to be handled with care Fix no power measurements reported for TS011F plugs with appVersion 74. https://github.com/Koenkk/zigbee2mqtt/issues/12097

Product Documents

Sonoff ZBMini-L2, også kendt som ZBMINI Extreme, er den seneste udgave af Zigbee-smartkontakten uden nul-leder, som kan styres via deres app eWeLink, når den er tilsluttet en Zigbee-bro. Med sit kompakte design passer denne smartkontakt nemt i de mindste EU-type/86-type/120-type monteringskasser - dvs. også de danske! I am considering putting some of these in to make my ceiling fans smart (just the light kit). My concern is that my circuit is the standard 15A and this zbmini is only rated for 10A. What if we plug some things into the outlet, down circuit from this device, and draw 12A (for example)? Are there concerns that this device might fail or… idk… catch fire, explode, etc? In a 50 mm internal depth wall housing there is with 28 mm plenty of space left for a switch, providing minimal cables and thin flexible cables between module and switch, providing they are properly terminated with wire ferrules Rename `permanent_led` to `led_when_off` for BTicino K4003C/L4003C/N4003C/NT4003C, L441C/N4411C/NT4411C and Legrand 067772, 067771 (#4200) ZBMINIL2 supports on/off switching and setting the default power on state but is not a Zigbee router/repeater.

I’ve not read about any ZHA/zigpy developers working on adding OTA provider to zigpy for sonoff, see: Separated definition of Zemismart ZM25TQ from big Tuya section with added tz.tuya_data_point_test capability and removal of speed control not supported by this device. Also say that the switch box does not have Neutral cables, only Line. I had seen this post: How to combine Sonoff ZBMINI with Zigbee smart bulb where it seems that the previous model does allow the relay to be jumped connecting everything to Lin but it requires a Neutral (I would have to pull a cable) and due to space I am not sure if it fits in the switch box.

Success!

In the absence of other information, I’ve been doing some first-hand testing of the ZBMINI. Here are my conclusions to some of the questions above. Fix TS0601_air_quality_sensor formaldehyd and voc units. https://github.com/Koenkk/zigbee2mqtt/issues/11033 D) The inspector I talked with said a device like this was acceptable for US codes because it had the manual switch override. He also said that using 18-guage wire for the switch would be acceptable as long as the load and line used proper gauge wire for the circuit’s rating. Out of the box ZBMINIL2 is already in pairing mode. If you need to re-pair, hold the device button for 5 seconds until the green LED slowly blinks.