Apollo Ultrasonic Füllstands-Sensor Standard Standard Betriebsspannung (Bereich): 150-250 V/AC 1S

Product Information

This could mean that the gauge has been installed at an angle and not pointing straight down into the tank causing the beam to bounce around the tank and not be received correctly.

One size fits all. The Apollo Ultrasonic is suitable for almost any tank up to 3 metres tall, irrespective of manufacturer, capacity or material of construction Technik Apollo Groz Kingspan Albion Kingspan Albion Ultrasteel Kingspan Parts Kingspan Sensor Piusi Polylok SureStop All BrandsCarbery Cemo Groz Harlequin Kingspan Atlas Kingspan Parts Kingspan Sensor Kingspan Titan Piusi Trailer Engineering All Brands Not suitable for use with single skin tanks or at fuel oil storage installations incorporating an open bund. Q19. I have removed my transmitter from the tank and have found that the liquid in the tank has left a chalky residue on the bottom of the transmitter. Will this affect its performance?

No, as you have not used any oil, the level of oil has remained constant thus the monitor has received the same reading. Upon using your oil again, the unit will update the Days to empty again. Note depending on your oil usage, this may take up to 1 week. Tanks should only be filled to 95% of their brimful capacity. In the event that the tank is filled to the top, this will not harm the transmitter as it is a sealed unit. If the tank is filled to the top as described then the oil/liquid will be too close to the underside of the transmitter and will result in incorrect readings or a flashing triangle error on the receiver device. When the oil/liquid level drops to 100 – 120 mm from the top of the tank, the readings will return to normal without any adjustments or action needed. This means that the Watchman disc is having trouble receiving the radar echo from the bottom of the tank.The receiver is equipped to give you a number of different readings based on the information it receives. Its primary function is to show the level of oil/liquid in the tank by way of bars on the screen. The more bars you see, the more oil you have in the tank. Each bar represents 1/10 th the height of your tank, e.g. if there are 5 bars showing, this would indicate your tank is half full. The bars will begin to recede as you gradually use the oil in the tank. 10 bars tell you that the tank is full and when the level reaches a low preset level in the tank an “Early Warning Nozzle” is shown. As the level drops further, the “Almost Empty” red light will flash on the screen. Ideal for monitoring heating oil and diesel – but also suitable for a wide range of liquids including admixtures, agricultural fuel oil, anti-freeze, biodiesel, bio heating oil, fuel oil, detergents, lubricants, waste oil and water. Range:

Ideal for monitoring heating oil and diesel – but suitable too for a wide range of liquids including admixtures, agricultural fuel oil, anti-freeze, biodiesel, bio heating oil, fuel oil, detergents, lubricants, waste oil and water. The reason for the foregoing is that the Ultrasonics bounces a sound from the surface of the oil/liquid and measures the time it takes to then give a reading but if the oil/liquid is too close then it cannot record a time, it, therefore, needs a distance of 100 – 120 mm to give a correct reading. The receiver unit displays the level of fuel inside the tank, via an easy-to-read LCD display, which also includes a low level warning alert.

Contents Gauges

The Apollo is an electronic gauge that uses ultrasonics to measure the level of oil/liquid in a tank. The transmitter on top of the tank measures the level and transmits the information wirelessly to a receiver in the house/office. The receiver is plugged into mains electricity and by way of bars on the screen indicates the level of oil/liquid in the tank. Bunded Oil Tanks Domestic Oil Tanks Titan Oil Tanks Cemo Uni-Tank Carbery Oil Tanks Harlequin Oil Tanks Atlas Oil Tanks Fuel Dispensing Tanks Fuel Masters Portable Fuel Dispensing Tanks Carbery Fuel Points More Fuel Dispensing Tanks

If there any objects or debris in the way of the beam then this error may occur also after a tank fill if the oil is within 6″ of the gauge The Apollo Visual Electronic Oil Tank Contents Gauge allows you to measure the level of fuel in your tank from the warmth, comfort and convenience of your home. It also allows the tank contents readings to be taken at the tank. Apollo Visual builds upon the success of the original Apollo Ultrasonic oil level monitor. Like the Apollo Ultrasonic, Apollo Visual comprises a tank mounted transmitter unit and a plug in receiver unit. Kingspan Tanks -Tail-lift deliveries are available for most tanks up to 2,000 Litre capacities for kerbside delivery.Q20. What if the oil in the tank is full to the very top? Will this harm the Apollo transmitter and will I receive a correct reading? The Watchman Sonic AdvancedIs installed using the same method as the Sensit and Sonic - The advanced unit allows you to have both options of oil level monitoring (In the property and via app). Hytek Engineered Kingspan Kingspan Agriculture Kingspan Albion Ultrasteel Kingspan Flomaster Kingspan Klargester Main Heating The Apollo Fuel Level Monitor is suitable for use with any oil tank up to 3 metres tall, storing Adblue, Biodiesel to British Standard BS EN14214, Heating Oil / Kerosene (C1/C2); Diesel (D), Agricultural Fuel Oils to British Standard BS2869 and Water. On-screen, low level warning alert with audible alarm, reduces the risk of running out of oil. Applications: