Joined in 2023 
82 
63 About this deal
A riser adapter from 3M company connects the PCI-Express x16 slot of the motherboard to the left-hand side of the case. This space can be used to install a graphics card up to 295mm in length.
With the CE declaration a company guarantee, that there product conforms all laws for this type of product. This means the EU had specified a ton of guidelines for every product. The actual availability of those boards is atrocious though. AusWolfI'm not worried about heat dumped into the case. My point is that with less surface area, you need a more capable cooler with more airflow to keep your silicon temperature low.Yeah, that's what I'm saying.The result is a unique product that is much smaller than all competing cases. This case is perfect for SFF (Small Form Factor) enthusiasts, those who need a highly portable system, developers who require a case with a smaller footprint due to limited desk space, and gamers who want a high-end PC experience in their living room.
My Dan A4 H2O can still handle high end hardware (not the i9 without an undervolt/power limits :D ), and a big GPU is still going to perform better here than a small one. The sides and top panels are perforated, there's holes everywhere...but there's literally a single RTX 4090 SKU that will fit (the ventus). The FE are a no go because the flow through design could only work with a 4-slots design layout. (There's an offset system for the Two slot FE) MethodologyWe measure several temperatures and the system noise level across all cases. Every test is performed with the same set of components installed. The out-of-the-box fan setup is used, connected to the motherboard, with the board adjusting fan speed automatically. This puts the onus of noise and performance on the case manufacturers and motivates them to actually care about thermal performance instead of simply using active cooling as a marketing bulletin point. Every component is able to cool itself by getting fresh air directly from the outside. Hot air in the case will move to the top and then outside without the need of an extra fan. This principle works perfect and results in an amazing cooling efficiency compare to other cases. Other than that, I agree - configurable TDP is probably the greatest invention in modern CPU technology.AusWolfThat's the thing. The air dumped into your case should move, otherwise, it's just gonna be recycled by your CPU cooler, which affects silicon temperature as well. Sure, it won't kill itself, but throttling can be an issue.Yes and no. Define "throttling" :D We let the chassis sit at idle until temperatures reached equilibrium. Next, our stress-testing load is started, and it continues to run until temperatures are stable. The temperature result for each section of the case is the highest value measured during the test run. All reported temperatures are normalized to 20°C room temperature. While Real Temp offers excellent and repeatable temperature results, we employ a REED Instruments SD-947 Data Logging Thermometer with four K-Type sensors that have been placed as closely as possible to the benchmarked areas of the CPU, GPU, M.2 SSD, and motherboard chipset. A fifth sensor is used to monitor the room temperature for an accurate delta T result. If there is one small form factor (SFF) case that has defined the growth in popularity of the SFF movement, it has to be the Dancase A4-SFX. This mini-ITX case has shown it is possible to build highly capable, enthusiast-grade machines that not only are super compact, but also look drop-dead gorgeous. Rightly so, it has been featured as one of our best SFF cases to build with in 2019.
Really the best small form factor case money can buy. Whilst expensive the Dan Case proves you do not to spend 300 for a ghost s1 or similar. My case was constructed to a very high standard with no sharp edges, everything aligned perfectly and it was a dream to build in. Worth mentioning the case itself is relatively light which means transporting my final build has been a breeze. Well worth it. After that you have a test report for your case and you are able to write the CE conformity declaration. Without trying to patronise, silicon temperature isn't related to how much heat is dumped into your case by the CPU, it's the power draw in Watts. A 15W CPU can run at 95C and a a 230W CPU can run at 60C and yet the hotter 15W chip will result in far, far lower case temperatures because it's only the Watts that are transferred out of the heatsink. If anything, a CPU operating at much higher temperatures is able to extract greater efficiency from the cooler because the larger temperature delta between the air and the heatsink results in a faster energy transfer from hot metal to cool air. In other words, more energy is extracted by the cooler for the same amount of fan RPM and noise.I'm not worried about heat dumped into the case. My point is that with less surface area, you need a more capable cooler with more airflow to keep your silicon temperature low. dyonoctisVRM wise Buildzoid was pretty satisfied with the current offering, if you are going high-end you get 10 phases at the minimum, and the mid-range got 8 phases.Buildzoid's VRM analysis of the various mITX boards was indeed reassuring.On the software side, the test setup includes Windows 10 Pro with Furmark and Prime95 both running at the same time to put the maximum load on both the processor and the graphics card. The new V3 edition features quality Lian-Li components including a new PCIE 3.0 riser module,optional AIO mount for CPU water-cooling support with both a 92mm and 120mm radiator configuration plus mounting points for theHDPLEX 400W HiFi DC-ATX. A number of creative ideas were needed to create the case. Using a PCIe extender allowed for the most prominent design feature of this case, which is the location of the GPU behind the motherboard. The A4-SFX will come with the highest quality PCIe extender on the market, made by 3M, which allows for PCIe Gen3 and Gen4 support. At this point, if you really want a tiny PC, it's a boatload easier to just accept that the flagship/halo CPUs and GPUs aren't aimed at mITX any more. They folded the rinser cable like so that you cannot fit a 14mm case fan under it. According to the specs the case even holds a 15mm fan. Folding a super expensive rinser cable is no fun.
Great Deal 
New Comment