Rust-Oleum AE0040028E8 400ml Surface Primer White

Product Information

Unwanted Food or Drink Products - Once supply conditions are broken, there are a number of factors outside of our control that can affect the quality of a product. Therefore perishable goods such as food and drink cannot be returned. Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour Data sheet Manufacturer Rust-Oleum For Use By Professional Use Interior / Exterior Use Interior & Exterior For Use On Steel Application Method Brush

Pneumatic and electric airless equipment. Tip size: 0.013-0.015 inch. Fluid pressure: 130 - 200 bar. Drying Time: Touch dry in 4 hours. Handle after 8 hours. Apply a second coat after 16 hours (if necessary). Full hardness is achieved after 7 days. Ensure application conditions are favourable for painting, we recommend that the temperature is between 10⁰C - 32⁰C with a maximum humidity of 80%, do not apply in direct sunlight or if conditions are humid. Remove grease, oil and all other surface contaminations by alkaline or high pressure (steam) cleaning in combination with appropriate detergents. For optimum results remove rust, rust scale, mill scale and deteriorated coatings by abrasive blasting to Sa 2½ (ISO 8501-1 : 1988), blast profile max. 50 µm. If blasting is not possible remove loose rust and loose coatings by scraping and/or wire brushing to St 3 (ISO 8501-1 : 1988). Sand previous coatings which are in good condition to remove gloss and to roughen the surface slightly. The surface must be clean and dry during application. Data sheet Manufacturer Rust-Oleum For Use By Consumer Use Interior / Exterior Use Interior Use For Use On Floors Limitations: Store in a dry, safe place. Do not store paint in environments where extreme temperatures may occur. Keep within 5-30°C. Do not store in direct sunlight. Whilst every effort is made to ensure the accuracy of colour, due to limitations of the print process, colour / finish shown is for guidance only.Application Brush, Roller, Spray Dry to Handle (at 20°C) 8 Hours Dry to Recoat (at 20°C) 16 hours (20°C)

For reasons of hygiene and safety, personal grooming products, cosmetics or items of intimate clothing cannot be returned.Temperature of air, substrate and coating material between 5 and 35°C and relative humidity below 85%. The substrate temperature must be at least 3°C above dew point. Temperature of air and substrate between 10 and 35°C and relative humidity below 70%. The substrate temperature must be at least 5°C above dew point. Remove grease, oil and all other surface contaminations with Rust-Oleum FK111 Cleaning Solution or by alkaline or high pressure (steam) cleaning. New concrete should cure and dry for at least 30 days prior to the application of the coatings. The surface must be clean and may be slightly damp during application. Stir individual components thoroughly before mixing them together. Use the boxing method or a low speed mixer.