Beko Washing Machine Drain Pump Filter Assembly

Product Information

The filter is usually located at the bottom right-hand side of the appliance, behind a cover. To access the filter, you will need to unplug the machine and remove the cover. Removing the Filter If the pump filter inside your washing machine is broken, you’ll need to fix it before reinserting it into the appliance and doing any more washing. Brand-new filters are relatively cheap, and they’re easy to install on your own.

So, there you have it: our complete troubleshooting guide for your Beko washer so you’re always prepared in the event of a problem.

Why does my washing machine smell?

If your Beko washing machine stops abruptly mid-cycle, the door switch may malfunction, or a faulty water inlet. The filter protects the drain pump from potential damage from foreign objects during the discharging of water, like coins or buttons. It is located on the bottom right hand side of your machine and should be cleaned every three months, or whenever it becomes clogged. If you have no idea how to access or clean the pump filter inside your Beko washing machine, this guide should tell you everything you need to know. If the connection feels or appears loose, or if there is no clamp or sealed connection at all, water may be leaking out of the bottom of the washer.

In addition to cleaning the filter, it’s also important to clean the drum, detergent drawer, and door seals regularly to prevent the build-up of mildew and mould. You can use a non-abrasive cleaning product and hot water to clean these areas.Finally, if the washer is still making weird noises, call a technician to come out and determine the source of the noise and take the necessary steps, which in most cases will be a component replacement. Connect with an Appliance Repair Technician It could also be because you put the washer near another appliance which causes it to rattle every time it runs. The Beko washer could be leaking because your complete unit isn’t level, resulting in an out-of-balance washing drum. Another problem can be the motor coupling, which connects the motor with the device’s transmission.