Innokin Sensis Replacement Pod & Coil

Product Information

As a vaper this goes against all of my instincts. Letting your device fire on its own (when triggered), that seems so strange to me. Also this type of system firing without drawing on it? That’s usually a recipe to burn your coil out. Innokin Sensis – Find-F (F0 Mode) So the first thing I did was sent Innokin description over to my electrician dad and he approved by saying it does make a lot of sense in regards to electrics.

Depending on the frequency you choose, it often feel like the vapour is vibrating/pulsing into your mouth, it’s rather strange. New modes and features include Coil+, Refresh and a very secretive mode that has till now been referred to as ‘Find-F’. Up top, Innokin has ditched the 510 connection, instead you get a 4.5ml capacity pod (2ml TPD) which is compatible with Innokin’s Z-Coils which also include a small airflow adjustment ring on the base as well as an AFC slider on the Kroma-Z device itself. For the 0.8Ω Z-Coil, recommended at 15 to 18 Watts, I went with a 50Vg 50PG 20mg Nic Salt – GotSalts – Peachy Promise. Generally the Sensis EZ ends up being such a good all-rounder for lower powered vaping but without sacrificing flavour and warmth, naturally vapour production is lower but for me that’s a huge pro for indoor vaping and vaping in public. The other benefit is the 3000mAh battery life which is excellent and would last me a full day and evening with the 0.65ohm coil.Unfortunately for me, these coils do use the removable bases. So make sure you remember to take them off your coils before disposing of your coils. Does the Coil+ Mode Improve the Experience? Secondly, the fill port for the liquid is at the bottom, which is inconvenient and makes the pod more prone to leaking and condensation. The Pod Mod Airflow I haven’t experienced any leaking with this pod at all. Using The Innokin Sensis Kit How To Change the Innokin Sensis Coils So what I really want to know is what is the difference between manual and auto refresh (of course, that feature is only in F0). Can you help me with that? There are a few modes here that a lot of people will not have used before, so let’s take a closer look at what each mode is supposed to do. Power

and that’s very true, for example 25Hz is much better for flavour with the 0.65ohm coil than 416Hz. Really not a fan of The TPD volume reducer though, it’s ugly and.. well.. it reduces the volume… I’ll have to have a look at getting that out.The capacity of the pod has increased for non TPD areas from 3.1ml to 4.5ml. Sadly for TPD regulated areas the capacity is still 2ml. I've gone through tons of Z-coils, mainly the MTL ones. One of my favorite MTL drop-in coils. Flavor wise they are not the best, but they perform very well and have an amazing longevity, have used some coils for over 5 weeks and they were still performing on an acceptable level. Flavor from the MTL coils is proper, but as said not the best. I actually think this device performs better than the Zlide (my favorite MTL drop-in coil), simply because of the extremely tight airflow capabilities on the Kroma Z pod. While I was waiting for my Innokin Sensis to arrive, all I could do was play with my Prototype version and watch the hype train as it caught full speed.