Gyeon Q2 CanCoat, 200 ml

Product Information

Constantly topping isn't going to 'harm' anything, but at the same time regular use of any chemical resistant product without having fully decontaminated the car is going to sandwich in road film, tar, iron etc. that isn't an opinion, it's just fact. If you look at it objectively, it makes little sense to use a QD that lasts 6 weeks, weekly.. your LSP is now Ceramic Detailer, which is inferior to Cancoat in pretty much every way. For example Cancoat is the most expensive and labor intensive way to coat a car over a set time period of 3 to 5 yrs compared to other using your term, traditional coatings, which for most long lasting durability being one of the primary reasons to coat a car. Outdoor Friendly. Meaning it can be applied outside but not in direct sun and avoid wet wet weather for the first 24 hours as it will affect the cure time (ie dew, rain). This will be a big hit for those that don't have access to a garage as it applies to all of the Gyeon coatings. One thing mentioned in the included maintenance book, is to apply Gyeon Cure as a precaution if planning to leave it outside.

Simply spray onto the attached microfibre and wipe until you achieve full gloss. That is how easy it is to apply Q² CanCoat EVO! Now in its EVO form to provide you with a more durable yet easy to apply SiO2 based coating. Although paint correction on a fully decontaminated surface is the main course in approving the aesthetics of your paint, I have noticed an amplification in the look of the paint after using CanCoat. Gyeon CanCoat has the ‘glass like gloss’ look a coating provides as seen below with this Audi RS5. The original Q2 Cancoat was an absurdly easy way to protect paint and trim for up to 6 months (although we were able to get 9 months of protection in our testing). So for the next generation of absurdly easy to apply paint and trim protection, Gyeon Q2 Cancoat EVO offers double the lifespan of the original Cancoat: up to 12 months or 12 thousand kilometers of protection. Cancoat EVO's application process couldn't be easier: just apply it using the included microfiber towel, and wipe away the residue until your paint is looking its best for up to one full year. Ensure your exterior surfaces are clean, dry and free from contamination; so wash thoroughly and dry. Clay your car if required prior and we strongly suggest you wipe over with GYEON Prep to remove all traces of old wax, residue, polish or oils.I’ve discovered that Can Coat is a bit of a unique product. In my opinion, it falls somewhere between the two categories. Can coat claims to provide many of the benefits of a true coating such as strong protection against chemicals, environmental contaminants, and UV rays, however it does not offer the same durability that most coatings can provide. Can Coat is like a more potent version of a spray sealant such as Gyeon Cure, but a less potent version of a coating like Gyeon Mohs. Can Coat may be applied on top of an existing coating or as a stand alone layer of protection.

Regular maintenance washes with strong but pH neutral shampoos like CarPro Reset, TAC Mystic Bubble, regular Gyeon Bathe or Bathe Essence You may like the idea of a paint coating, but you may be intimidated by the application process. Or maybe you simply don't have the time to allow your vehicle to cure for 12-24 hours before driving it. GYEON knows that just because you're busy, doesn't mean you shouldn't be able to enjoy extreme water beading and that's why they developed GYEON Q2 CANCOAT EVO! Gyeon claims that Can Coat should be fully cured within 24 hours and it is best to avoid strong chemicals during the first week after application. Can Coat may be topped with Gyeon Cure if you wish. I recommend removing the sprayer from the bottle and cleaning it out with water after each use so you can re-use it. Store the bottle in a cool area with the cap secured in between uses. DURABLE HYDROPHOBIC PROPERTIES Q² CanCoat EVO offers more durable performance, improved visual enhancement and hydrophobic properties - all thanks to the updated EVO formula. It remains as easy to apply as it used to, now featuring even easier wipe off.

GYEON UK

Applied can coat at the weekend . Full paint cleanse and machine polish . I used Bilt hamber paint cleanser. Not sure if I should have splashed out on Gyeon prep. Anyway I then applied can coat . left 2 hrs and applied second coat .

If we are discussing merely a business willfully misrepresenting its offering, this would be a different discussion. I do not believe I have done that in this article. I have not been coy about bringing up those issues either in other articles. I can say I have used Gyeon CanCoat on clients’ vehicles. I have never charged the same rate for this protection as I would for the 18 month to 2 year offerings or other offerings at that time. There is definitely a very wide gap in the price for my 3 year and 5 year warrentied ceramic coating offerings. Simply spray onto a microfiber towel and wipe until you achieve full gloss. That is how easy it is to apply Q² CanCoat EVO! Now in its EVO form to provide you with a more durable yet easy to apply SiO2 based coating. I want to start by saying Gyeon recently released its Evo line, which includes a seemingly improved formulation of CanCoat. But for the sake of this discussion I will only mention the original formula.I relation to beeding. I honestly don't think it's any better than wet coat. Maybe I need to apply cure on top........surely the rain would not have washed this off or reduced the hydrophic ability after 15-20 hrs? If you are in not so ideal circumstances or have not applied a coating, this is a good product to try. You should apply Gyeon Q² CanCoat EVO in a dry place out of direct sunlight. In all cases, prepare the surfaces you are going to treat in the normal way (wash > decontaminate > polish), and then do a wipe down with Gyeon Q²M Prep to ensure that they are spotlessly clean. For best results, spray Gyeon Q² CanCoat on to either the supplied microfibre towel or a PB Super Buffing Towel and immediately wipe it over a single panel to spread a thin, even film of product. Then refold the towel and continue buffing to fully remove the film and reveal an intense streak-free shine. Alternatively, mist a Meguiar's Even Coat Microfiber Applicator Pad with Gyeon Q² CanCoat EVO and wipe a thin, even film of product over a single panel at a time before buffing off with either the supplied microfibre towel or a PB Super Buffing Towel. Either way, you should aim to complete all of the buffing off within 1-2 minutes, i.e. before the coating begins to harden.