Makita HR4013C/1 110V SDS-Max AVT Rotary Demolition Hammer Supplied in A Carry Case

Product Information

Anti-Vibration Technology (AVT) is a synchronized, three-component system that more effectively reduces vibration resulting in a low 5 m/s² Because Makita is a well-known tool brand, they are reliable when it comes to warranty policies and unit care. So you might want to try this rotary hammer if you’ve gone through cheaper hammers that didn’t live to your expectations in terms of power. The new Makita HR4013C SDS max rotary hammer will punch a 40mm hole in concrete and with a 1,000 watt motor that will run up to 500rpm without load, this machine will generate up to 2,900 blows per minute for 7.6 Joules of impact energy. This represents a 25% increase over the popular HR4011C model that it supersedes.

Overall, the Makita HR4013C is a great choice if you’re looking for a rotary hammer with soft vibration, especially if user fatigue is your biggest concern. Advanced Anti-Vibration Technology (AVT®) is a synchronized, three-component system that more effectively reduces vibration resulting in a low 5m/s2 Soft no load" function automatically reduces the motor speed during idling to suppress the vibration of the machine body

Vibration absorbing housing features a spring loaded main handle and upper housing that move independently of the motor and drive mechanism efffectively isolating most of the vibration away from the user If you are still unsure, go through the list of pros and cons below to help with your decision. Pros of the Product Sequential impact timing delivers timed hammering during rotation to minimize overlapping bit impacts for up to 50% faster drilling Another great feature of this model is the soft-start function to improve user control, as well as the constant speed powered by the electronic controller even under heavy loads.

The Makita HR4013C’s 11-amp motor has up to 8.4 foot-pounds of impact energy. Weighing just over fifteen pounds, it sports a maximum concrete drilling capacity of 1-9/16 inch. For jobs that require a lot of power (e.g. hard clay soil and trenching), you’ll definitely like the Makita HR4013C and its 11-amp motor. Furthermore, its anti-vibration technology helps a lot when it comes to tough material and leaves you feeling less tired afterward.P264 Wash … thoroughly after handling.P273 Avoid release to the environment.P337 If eye irritation persists:P313 Get medical advice/attention.P280 Wear protective gloves/protective clothing/eye protection/face protection. The 1-9/16” AVT® Rotary Hammer (model HR4013C) has 45% less vibration and 20% more impact energy than the previous model. It is engineered with enhanced Anti-Vibration Technology (AVT®), a synchronized three-component system for significantly less vibration. The result of the enhanced AVT® is a category-leading vibration rating of 5m/s². L.E.D. service light notifies the user approximately 8 hours before the brushes need to be replaced Advanced AVT® includes an integrated damper spring at the base of the impact bolt engineered to absorb impact vibrations from the drill bit