Tefal Ultimate Pure Steam Iron, 260g/min Steam Boost, 350ml Water Tank, 3m Power Cord, 3100W, Black and Rose Gold, FV9845

Product Information

See the instructions for use to find out what type of water is appropriate and clean the soleplate from time to time with a damp sponge. What is the right temperature for my clothes? Always use untreated water in your iron. If your water is very hard, we recommend you use a mix of 50% untreated tap water and 50% distilled water. The higher the wattage, the faster the iron will reach the desired temperature. Where can I dispose of my appliance at the end of its life span? The board should be perforated to allow the steam to pass through the fibres of the fabric to soften it and make ironing easier. The ironing board cover should also be suitable to allow the flow of steam through. The soleplate of my iron is giving off a yellowish colour that is staining my clothes. Remove the anti-scale valve (or set the control to self-clean/autoclean depending on the model). Steam, water and scale deposits will leave the steam chamber through the steam holes and the iron will be clean.

The most powerful Tefal steam iron that stops limescale stains** on clothes. Only Ultimate Pure features the exclusive and patented MicroScale filter technology, a two-in-one innovation that stops scale* and produces pure steam for ultimate ironing. Here’s how it works: steam, polluted by limescale in the steam chamber, enters the filter. The filter captures even the smallest of scale particles** and produces 100% filtered, pure steam – so, you can iron without the worry of scale staining your clothes. It’s easy to clean, too: just pull it out to remove the scale in one go. Combined with Tefal’s most powerful steam – up to 60g/min continuous and a 260g/min steam boost – this guarantees perfect ironing results.Important: The iron takes longer to cool down than to heat up. We recommend that you start with fabrics to be ironed at a low temperature. Which water should I use?

After use, empty the tank, close the steam control, set the thermostat to minimum and stand the iron upright or place it on the base (depending on model). Gently shake your iron to reactivate it, the lights should start to flash and then the product should start to heat up. Never clean your iron's soleplate with abrasive or metallic pads. How can I avoid shiny marks on fabric? You have used a starch type product on your laundry (Always spray to the reverse side of the fabric to be ironed and clean your iron afterwards).

Efficient ironing: The Durilium Airglide Autoclean soleplate brings 33% more glide**** and maximum steam distribution for efficiency. Use steam only when the iron is hot (the light must be off). What is the vertical steam function used for? How do I use it? No, you must always unplug the iron before filling it. How can I avoid scratching the soleplate of my iron? Yes and you do not need to fill the tank with water. Set the variable steam control to Dry and set the temperature to suit the type of material (care points •, ••, •••). The Durilium Airglide Autoclean soleplate brings 33% more glide* and maximum steam distribution for efficiency and the Autoclean coating keeps it clean.

Not all of the steam holes release steam, the smaller holes on the soleplate that look like they might be steam holes are actually designed to assist soleplate glide ability. Why isn't the spray function on my iron working? Let the anti-calc valve soak for 4 hours in a glass of commercially available white vinegar or natural lemon juice, then thoroughly rinse the anti-calc valve under tap water. The Iron is not heavy but neither is it light. I`d say its a medium weight Iron , but the weight I found was just enough to help with the pressing of the clothes. It glides across the clothes very smoothly and easily and actually is pleasant to handle. The Cord is quite long and manageable . Its very easy to fill up at a flip down lid situated on the front of the Iron facia and has a Max level to fill it up to . It comes with a handy little plastic jug for filling with the preferred "Tap" water only. The selected temperature is too low and does not allow steam to be produced: set the thermostat to the steam zone (between 2 dots and MAX). I found the settings are easy to read on the Iron and pretty much straight forward to understand by the descriptive Icons.You are not using the right type of water (Refer to the FAQ "What water should I use for ironing?"). Cleaning the anti-calc valve: Remove the antiscale valve and soak the valve in a cup of white vinegar or plain lemon juice for 4 hours. I want to remove the water from the tank but there is still a little left. Rapid results: This 3100W iron delivers a constant high steam output of 60g/min and a 260g/min boost. The selected temperature is too low to use this function: set the thermostat to the zone between 3 dots and MAX.