Revell 30ml Decal Soft

Product Information

Before you apply decals, you’ll need to have your workspace cleared and all the necessary tools on hand. Here is a list of the tools you’ll need: Edit @ October 2016: nowadays I spray the entire model with a clear lacquer from Halfords (recommended to me by Phil Stutcinskas, a member of the Forge World studio), instead of painting varnish onto the surface where the decal is going to be applied. This protects the model, eliminates brush marks, and ensures an even finish. A layer of gloss varnish provides a smooth surface for the decal to adhere to. Once you are happy with the position of the decal, dab another paper towel on the decal to soak up any left over water.

Decals | Scale Models Forums Decals | Scale Models Forums

This type of decal is a little uncommon and should not be confused with water-slide decals or vinyl self-adhesive decals. Wet self-adhesive decals have adhesive on the rear of the decal, which when wet with water, allows the decal to be moved into the correct position before carefully wiping away any access water. This causes the decal adhesive to bond to the model permanently. A small amount of washing up liquid added to the water will help the decal to slide better until you are happy that you have it in the correct position. Edit @ October 2016: use as little water as possible. I use a plastic box lid with just a few drops of water. Once the decal is in position and you’ve removed the excess water, apply the softener with a brush and leave it for a couple of minutes, before soaking up the excess. Second, the blue Microset bottle looks a LOT like the bottle that the Liquid Decal Film comes in. You do not want to splosh this on your model instead of Microset unless you really want to start painting again! Another lesson learnt the hard way! Once you have applied all your decals, and if you have done it correctly, they should now have the appearance of being painted on. From here, you can either leave the model with a gloss finish, or apply some weathering techniques.

As always, model making is as much about follow instructions as it is about following your own creativity. Decals are a great way to enhance your model even further, so add them where you see fit and make your model stand out! If you like to weather your decals, now’s the time. Google has plenty of advice on doing this if you’ve not done decal weathering before. First, although Microsol is not the strongest solution available it can be too much for some decals. I always test on an unwanted decal from any decal sheet to make sure it won't destroy the ones I intend to use on the model. If there is a problem you can always dilute the solution with water. I'd recommend this no matter which of the decal solutions you are using. This is a lesson I learnt the hard way! I use the Microset/Microsol system myself. It's the blue bottle (MICROSET) which should be brushed onto the model. A dilute solution of white vinegar will serve the same purpose of softening the decal film slightly. The red bottle (MICROSOL) is the one that should be applied later and is a stronger solvent. It's one, or several, applications of this which will get that decal snuggled down.

Decal Soft, 30 ml - 3DJake International Revell Decal Soft, 30 ml - 3DJake International

The best way I’ve found to solve this is to give the surface a coat of gloss varnish before I apply the miniature. I have a pot of Games Workshop ‘Ard Coat which I only rever use for this purpose: by brushing on a generous amount of varnish to the surface, you will get a nice smooth surface upon which you can apply the decal: all the troughs and peaks will be smoothed out and you won’t have air gaps underneath. Edit @ October 2016: be very careful when soaking up the excess softener as any agitation can cause the decal to warp or break! Revell Decal Soft serves perfectly for applying transfers/decals to a model. After the decal has been positioned on a painted part of the model, using the brush in the bottle cap, apply Revell Decal Soft evenly over the decal. Due to its softening effect the decal can be adjusted to the contours of the model with a firm brush.Decals consist of an image printed onto a thin film. The film is brittle and plastic, in the technical sense that it remembers its shape (a flat sheet) and will try to return to it if possible. That means that unless you’re applying the decal to a perfectly flat surface like a mirror, you’re going to end up with gaps underneath the decal, which will result in bubbles that will ruin the finish. Air gaps beneath the decal will result in an uneven finish I have never used revel decal soft, but someone else can probably correct me if I am wrong. I normal use micro-sol and micro-set and presume the revel decal soft works in a similar fashion to micro-sol. AWIN, Sovendus, Meta-Pixel, Google Ads, Microsoft Advertising, creativecdn.com (RTBHouse), Ads Defender

Decal Soft Tomedeks Plastic Felt Edge Squeegee - Car Squeegee Decal Soft

We use a Secure Server for collecting personal and credit card information. The secure server layer (SSL) encrypts (scrambles) all of the information you enter before it is transmitted over the Internet and sent to us. All of the customer data we collect is protected against unauthorised access as per the Data Protection Act. Essentially the dreaded silvering, where the decal carrier film becomes visible, is caused by microscopic air bubbles under the decal. There is a much higher likelihood of this occurring on a rough, matt, surface than on a smoother gloss one. While this is often enough to keep the decal in place, if you feel it necessary you can use the second paint brush to apply the second decal solution on top of the decal. This will set it firmly. Start off by carefully selecting the decal that you are going to place onto your model. Use a fresh hobby knife blade to cut as close to the artwork/lettering as you possibly can, so there is little or none of the unwanted clear vinyl that the self-adhesive decal is printed on. You can use a pair of scissors to cut out the decal, but you may find that a hobby knife is better suited to the task. House of Hobbies may release account information when we believe, in good faith, that such release is reasonably necessary to (i) comply with law, (ii) enforce or apply the terms of any of our user agreements or (iii) protect the rights, property or safety of House of Hobbies, our users, or others.As you come to the end of a scale model build, you often have a few decisions to make – do you go for a polished finish, or a more weathered look? Do you keep the traditional colour scheme, or go for something more artistic and original? And do you use the provided decals, paint your own designs, or keep it clean? Your decal soft is a solution which will soften the decal film allowing the decal to conform more closely to the surface of the model, hopefully to get that painted on look we all want. There is no guarantee that it will prevent silvering. You might be able to mitigate silvering by piercing a decal with a needle or the end of a scalpel blade and flooding it with a decal solution, but again, there is no guarantee. It's far better to get it right initially and that's why I always recommend a gloss coat of your choice. It's only one more step in the process and the final desired finish can be achieved with a final coat of a suitable varnish.