Feedback Sports Pro-Elite Repair Stand with Travel Bag (Red)

Product Information

If you have a dedicated space or think of yourself as more than a home mechanic, a permanent, pro-style stand, like the Park Tool Deluxe Double Arm Professional Work Stand, might better suit your needs. These are generally heavier, cost more and have a sturdier clamping system - should you ever need to crank down on a bolt or pedal that just wont budge - these repair stands help by either sitting on a heavy duty base or are permanently installed on your workshop floor. And if you plan to work on e-bikes, make sure the stand can support the weight and has a wide enough base to be stable when loaded. Many repair stands have a weight limit that’s high enough to support most e-bikes, but some of the lighter and/or portable stands that are meant for travel may not be appropriate. Total load capacity of 120lbs (54kg) accommodates service on all road, cyclocross, mountain bikes, and electric

Feedback Sports Ultimate Pro Elite Workstand review - MBR

A workstand aka bicycle repair stand holds your bike firmly and off the floor so you can do repair and maintenance work more easily. You don’t have to spend a fortune to get a good one. We've clamped our bikes into dozens of different workstands over the years to find out which ones grab your bike securely. These are the best bike repair stands you can buy.

New, ratcheting and rotating crank for jaw closure is faster and one-hand operable: closes 60% faster than Pro

Feedback Sports Pro Elite Workstand Reviews Feedback Sports Pro Elite Workstand Reviews

Our reviewers are experienced cyclists that we trust to be objective. While we strive to ensure that opinions expressed This four-legged base stand is sturdy and stable, designed to securely support bikes up to 66 pounds (which includes most e-bikes). The clamp arm adjusts from a height of 42.5 inches to 74.8 inches. The clamp itself is lined with rubber to protect your seatpost and is adjustable to accommodate different tube sizes. Both the X-axis and Y-axis of the stand twist 360 degrees to help you access any angle you need your bike to be. An included tray attached to the shaft keeps tools close at hand, and a telescopic bar attaches the handlebar to the main pole to help maintain balance as you work.

Weight: 9.5kg | Working height: 120-198cm | Clamp offset: N/A | Leg footprint: 100cm | Rating: 10/10 While we loved most things about the PrepStand Pro, it lost a little ground to the competition due to the additional knob turning required to make adjustments to the clamp and clamp arm. It also has a lower weight limit and quite a few plastic parts, including a ring of plastic teeth that control the angle adjustment, which we feel could cause some durability issues over time. That said, we feel this is a well-refined and quality work stand for the traveling racer or gram-counting rider. You’ll notice at the base, there is a clamp mechanism to extend or retract the legs. The same clamp is towards the middle of the stand to extend the clamp post upwards as well. As far as unfolding, deploying, and adjusting the stand, those 2 clamps are all you need.