Amtech C2970 15mm and 22mm Pipe Bender

Product Information

It is well documented that soldered fittings and compression fittings interrupt the flow of water around a heating system. Bending of copper pipe ensures unrestricted flow of water and can also create attractive, crafted finishes on installations. If you’ve not used copper pipe benders before, you’ve probably never creased a pipe. It goes without saying creasing affecting the integrity of the pipe long term, and that’s a big no-no. If you’re installing a whole run of heating/gas pipe, swapping out the guides is going to turn into a real bug-bear.

The 2600K includes 15mm and 22mm aluminium guides. These guides are available as spares;15mm 2601N and 22mm 2603T. These guides also fit Irwin® and Hilmor® GLM. Pipe benders are used when piping needs to bend to fit around an obstacle, or through a gap. Bespoke automakers often use them to bend exhaust pipes and other automotive accessories into shape. Dual pipe bender - Dual pipe benders are the most common type of bender and are available in a wide range of shapes and sizes. When the levers are pulled fully, they provide a 90 degree bend. We have also designed bending arm extension handles to increase the leverage for bending both 15mm 22mm copper pipe. These short threaded extension handles code 1224M fit both the 15mm XV XVE & XVL and 22mm XXII versions. One or more extension handles can be added for additional leverage. We believe the 1215K-XV, the 1315XVE, the 1315Longarm-XVL, the 1222G-XXII and the 1322Extended-XXIIE are easier to use than a combi bender:They weigh under 500g, and that’s pretty-lightweight, but they certainly provide more than enough power to get the job done.

The Monument single sized pipe bender measurements can be seen in the image. 15mm standard version is approximately 460mm and the standard 22mm version is approximately 670mm. Combi Bender 2600K MON2600 If you’re working with microbore, unfortunately, there isn’t a set from Hilmore currently available in the UK.Pipe benders are used to bend metal pipes - such as stainless steel and copper pipes - to form a range of curves and angles. less fiddly – with the integrated hook and nylon guide, your hook stop won’t flop from side to side and the guide(s) won’t fall out We posed this question through the Tooltalk App (see all the answers in the app available for iOS or Android AOS).

The 15mm pipe bender also known as tube bender is an essential part of the toolkit for any heating or plumbing engineer.Place the Lever Arm over the positioned pipe and place the Lever Hook onto the Pivot Pins, ensure the Nylon Guide is seated. The price differential between Hilmor compared with Stanley and Rothenberger is just too small, and Hilmor offer so much more in terms of quality. Mark the pipe where you want start of the bend. Position the pipe in the Former under the Retaining Hook. Position the start of bend vertically in line with the Pivot Pin.

better sight lines – as the bend is in the same plane as the Arms of the bender it is easier to line up by eye So read on our review of the best copper pipe benders for plumbing pros, and DIY junkies and learn as we explain why we use the Hilmor copper pipe benders, and what the other options are. The Best Copper Pipe Bender Brands

Delivery Policy

Buy the Monument Bender Single Sized – 1215K-XV 1315- XVE (1315Longarm-XVL) 1222G-XXII 1322Extended-XXIIE