DRAYTON WIRELESS SYSTEM DIGISTAT SCR

Product Information

I have a Digistat+RF room unit with my combi boiler. Is it possible that interference from other wireless appliances can occur, ie computer systems, walkie talkies, radio controlled toys?

Wireless Room Thermostats | Drayton Controls Wireless Room Thermostats | Drayton Controls

Reset the Digistat thermostat by going into the setting menu, selecting the Inst03 menu (installer settings) and then rSEt20 to reset to factory settings. Then remove the batteries. When a boost is selected, a timer symbol appears in the bottom right of the display and remains until the next event. When used with electric heating the Digistat cycles the heater at 12 cycles per hour to maintain room temperature and save money.What should be done when E1 appears on the screen of a room thermostat. Does the whole wireless system need replacement? The TRV is liquid filled this gives a fast response to temperature and provides a greater temperature accuracy. Depending on the fuel type you select during installation will affect how Digistat works with your boiler/heat source - so ensure to select the correct type during installation. Digistat supports the following fuel types: I have a Drayton TRV4 thermostatic valve on the radiator. Is it correct that it can be installed on both the Flow or Return and can be mounted either horizontal or vertical?

New Drayton Digistat Wireless Thermostat | Drayton Controls

This option has no schedule and controls by temperature only. You set your preferred temperature and adjust it with the + and - buttons. Constructed with high-quality materials, the Drayton Digistat+1 is built to last and withstand everyday use. Its reliable performance ensures that the desired temperature is consistently maintained, providing comfort and convenience for the users.

The thermostat is not communicating with the receiver. Replace the batteries in the thermostat. Re-commission the 2 units. The Digistat is universal because it can be used as a fully-programmable thermostat or as a simple manual thermostat. In fact it contains 4 types of functionality: This groups weekdays and the weekend separately, so you can set a schedule for your weekdays and a separate schedule for the weekend. The Digistat qualifies as one of the additional measures required when replacing a boiler. In fact it qualifies both as a Smart Control and as Load Compensation. Which Digistats are being replaced? 2290B The Digistat qualifies as one of the additional measures required when replacing a boiler. In fact it qualifies both as a Smart Control and as Load Compensation.

Drayton Digistat+1 (English - 2 pages) User manual Drayton Digistat+1 (English - 2 pages)

If the valve is a 15, 10 or 8mm angled body then it can be fitted in either flow/return, horizontally or vertically. The Digistat is universal because it can be used as a fully-programmable thermostat or as a simple manual thermostat. In fact it contains 4 types of functionality: 7-day programmingThe red 'Receive/Alarm' light on the SCR flashes periodically for around 5 seconds every five minutes or so (which means that the Digistat and SCR are communicating) and the green light is 'on'. This means that we should be getting heat.

Digistat+C RF | Drayton Controls Digistat+C RF | Drayton Controls

Preset 3 provides heating all day long How is Digistat suitable for visually-impaired tenants/homeowners?

These batteries are factory fitted and not designed to be user replaceable. Unauthorised removal of the battery could damage the unit. TRVs The Drayton Digistat+1 can be wired directly to the heating system, providing accurate temperature control and minimizing temperature fluctuations. It is compatible with various heating systems, including gas, oil, and electric boilers, making it suitable for a wide range of installations. Green Premium is the Schneider Electric eco-mark that brings more value to our customers and more growth to our company. day / 2-day programming:This groups weekdays and the weekend separately, so you can set a schedule for your weekdays and a separate schedule for the weekend. In either mode the radiator or tap icon will be displayed. How do I change from Automatic to Manual mode?