HG Mould Remover Foam Spray, Mould Spray & Mildew Cleaner, Removes Mould Stains From Walls, Tiles, Bathroom Seals & More - 500ml

Product Information

As mildew grows, it releases spores that cause other colonies to form. Unless you completely remove all of the spores, it is possible for mildew to keep returning, especially if the conditions welcome its growth. This often occurs in humid environments and rooms, such as on the shower walls of a bathroom. If contained to non-porous surfaces, it can be fairly straightforward to manage and remove. But if there is an issue, such as a water leak that led to the mildew growth in the first place—or if you’re unsure what the source of the mildew is—it’s a good idea to call on a mold remediation specialist to test for mold in your home and safely remove it from all affected porous surfaces, including wall and flooring materials. Emma Phelps revised this roundup to provide more context for each recommended product. Phelps also conducted research for this roundup by speaking with Michael Rubino. Rubino is an indoor air quality and mold expert, the author of The Mold Medic, and the founder of HomeCleanse, "a revolutionary company with the vision to end the worldwide health epidemic caused by poor air quality and toxic indoor environments."Rubino is a council-certified Mold Remediator by IICRC and ACAC and a contributing member, sponsor, and speaker for the Indoor Air Quality Association. What kind of surface do you plan to use it on? Some mould removers are specifically created to target mould in certain environments or on specific materials. For example, if you need to remove mould from a pair of curtains, you will need to seek out a fabric-friendly mould remover. If you've identified mold or mildew in or around your home, consider snagging the RMR-86 instant formula. It targets both mildew and mold, removing stains, odors, and growth in as little as 15 seconds. After using it, you might not even know that you had mildew in the first place.

For porous surfaces, Rubino usually recommends discarding and replacing the item since the contamination can exist deep in the fibers. For non-porous surfaces, he recommends spraying the affected area and letting the product sit for a few minutes before wiping it away with a dry microfiber towel, letting the surface dry completely, and repeating the process two to three more times depending on the severity of the contamination.Simply spritz the product onto the problem area, allow it to dry and then wipe clean for almost instant results. In more serious mould cases, you might need to repeat the process to see true results. The spray also sanitises surfaces, minimising the chance of mould regrowth. Because of its natural and foaming spray formulation, this mold remover is safe to use on different surfaces and allows for a more direct and accurate application. For best results, spray the product on the affected area and let the foam work its magic for up to 10 minutes. Wipe off with a dry, clean cloth and repeat the process if necessary. If you’ve tried every method under the sun to get rid of mold and it still persists, it may be time to call in a professional. According to Rubino, it depends on the situation, but a general rule of thumb to follow is that anything larger than 10 square feet should automatically be handled by professionals. The manufacturer also claims this product works after just 10 minutes. Afterward, you can wipe the area clean with a dry cloth. If you're treating a mold stain that you've never cleaned before, we recommend cleaning the entire room where that stain is, just to ensure that any residual spores have been cleared from the area. The formula is septic safe, however it should not be mixed with other household cleaners or bleach, as the result can be quite harmful.

Keep in mind that this mold remover is explicitly designed to kill mold and mildew fungus that may be growing on the surface level. Despite the presence of ammonium, you will want to scrub the area and completely clean the affected room to be sure all mold spores are removed, per Rubino's guidance. Also, while we appreciate this formula's broad application potential, it is not a mold stain remover. If months or years of buildup have left lots of stains behind, you may need to use a separate product to remove the discoloration. There are three primary types of formulas for treating mold and mildew. Look for these terms to understand what the product can do in treating your mold problem. When used according to directions and for small spots in bathrooms or on appliances, mold removers are safe for homeowner use. However, it’s very important to take the necessary steps to keep yourself safe when cleaning.Removing mold does require some elbow grease, even when you're dealing with small spots in your home, but choosing the right product can make application easier. Mold removers typically come in spray bottles that give thorough, uniform coverage—even in hard-to-reach areas. Every remover on our list either comes in a spray bottle or has the option to buy a separate spray top attachment.

Guidelines will typically recommend wearing protective gloves as a minimum during application, with stronger products often suggesting the use of a protective mask to prevent inhalation. Most brands advise customers to open a window while using the product to increase ventilation in the space. This gel formula is ideal for tiles and grout, because you can apply it exactly where it needs to go. The nozzle is tapered for precision application, and the gel consistency keeps it from sliding or running all over the place. It is safe for a variety of surfaces in addition to tile and grout, such as glass, toilets, and some countertops. It doesn’t contain bleach, but it is still a good idea to test it on a small, discreet area before applying it all over the surface. Visible growth can come in a variety of colors ranging from gray and blue to brown and green; shapes, and textures including fuzzy, powdery, or slimy,” he says. ”Water damage can look like coffee stains, warped or bulging ceilings and flooring, and discolored carpeting. For odor, pay attention to an earthy, musty, damp, cigar-like smell due to the release of gasses called microbial volatile organic compounds, and for chronic health issues, look for symptoms that come out of nowhere that seemingly have no underlying cause.” We were genuinely impressed by the results, not only because of the price point but because it can be used in a wide range of settings. Another bonus is that its delicate apple scent offered a refreshing change from harsher chemical smells you often get with these products. Astonish comes with eco credentials, too, as it’s cruelty-free, vegan-friendly and the bottle can be recycled.Before choosing a mold remover, Rubino says it’s important to find one compatible with your affected surface. These include porous, non-porous, and semi-porous. According to Rubino, porous surfaces include fabrics and carpets, while non-porous surfaces include finished woods and sealed countertops. Finally, semi-porous refers to surfaces like leather and some types of plastic.